Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
Polyetheretherketone (PEEK) is a new type of special engineering plastic that has broad market potentials due to its particular microstructure and mechanical properties. However, few data can be found in the literatures devoted to the mechanical properties and machinability of PEEK, especially in t...
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2015
|
| Назва видання: | Проблемы прочности |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/173285 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone / S.J. Ji, H.J. Yu, J. Zhao, F.S. Liang // Проблемы прочности. — 2015. — № 1. — С. 224-230. — Бібліогр.: 17 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
irk-123456789-173285 |
|---|---|
| record_format |
dspace |
| spelling |
irk-123456789-1732852020-11-29T01:27:11Z Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone Ji, S.J. Yu, H.J. Zhao, J. Liang, F.S. Научно-технический раздел Polyetheretherketone (PEEK) is a new type of special engineering plastic that has broad market potentials due to its particular microstructure and mechanical properties. However, few data can be found in the literatures devoted to the mechanical properties and machinability of PEEK, especially in the superprecision field. For the first time, the microscopic mechanical properties and machinability of glassfiber-reinforced PEEK (GF/PEEK), which is one typical derivative of pure PEEK, are studied. The nanoindentation experiment was performed to analyze the microscopic mechanical properties of GF/PEEK. The machinability was studied by single-point diamond turning (SPDT) on the GF/PEEK surface, the roughness and form accuracy of the machined surface were obtained in the following test. Experimental results indicate that GF/PEEK has good microscopic mechanical properties and machinability. Полиэфирэфиркетон новый вид специального конструкционного пластика, который благодаря особой микроструктуре и механическим свойствам имеет большие возможности выхода на рынок. Однако в литературе можно найти не так много данных, относящихся к механическим свойствам и обрабатываемости полиэфирэфиркетона, особенно в сверхточной области. Впервые проведено исследование обрабатываемости и механических свойств на микроскопическом уровне полиэфирэфиркетона, упрочненного стекловолокном, который является типичным производным чистого полиэфирэфиркетона. Выполнено наноиндентирование с целью анализа механических свойств материала на микроскопическом уровне. Обрабатываемость материала изучали с помощью одноточечной алмазной обточки по его поверхности, при испытании были получены значения шероховатости и точности формы обработанной поверхности. Экспериментальные результаты свидетельствуют о хороших механических свойствах и обрабатываемости полиэфирэфиркетона, упрочненного стекловолокном. 2015 Article Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone / S.J. Ji, H.J. Yu, J. Zhao, F.S. Liang // Проблемы прочности. — 2015. — № 1. — С. 224-230. — Бібліогр.: 17 назв. — англ. 0556-171X http://dspace.nbuv.gov.ua/handle/123456789/173285 539.4 en Проблемы прочности Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| language |
English |
| topic |
Научно-технический раздел Научно-технический раздел |
| spellingShingle |
Научно-технический раздел Научно-технический раздел Ji, S.J. Yu, H.J. Zhao, J. Liang, F.S. Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone Проблемы прочности |
| description |
Polyetheretherketone (PEEK) is a new type of special engineering plastic that has broad market potentials due to its particular microstructure and mechanical properties. However, few data can be found in the literatures devoted to the mechanical properties and machinability of PEEK, especially in the superprecision field. For the first time, the microscopic mechanical properties and machinability of glassfiber-reinforced PEEK (GF/PEEK), which is one typical derivative of pure PEEK, are studied. The nanoindentation experiment was performed to analyze the microscopic mechanical properties of GF/PEEK. The machinability was studied by single-point diamond turning (SPDT) on the GF/PEEK surface, the roughness and form accuracy of the machined surface were obtained in the following test. Experimental results indicate that GF/PEEK has good microscopic mechanical properties and machinability. |
| format |
Article |
| author |
Ji, S.J. Yu, H.J. Zhao, J. Liang, F.S. |
| author_facet |
Ji, S.J. Yu, H.J. Zhao, J. Liang, F.S. |
| author_sort |
Ji, S.J. |
| title |
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone |
| title_short |
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone |
| title_full |
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone |
| title_fullStr |
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone |
| title_full_unstemmed |
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone |
| title_sort |
mechanical properties and machinability of glass fiber-reinforced polyetheretherketone |
| publisher |
Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| publishDate |
2015 |
| topic_facet |
Научно-технический раздел |
| url |
http://dspace.nbuv.gov.ua/handle/123456789/173285 |
| citation_txt |
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone / S.J. Ji, H.J. Yu, J. Zhao, F.S. Liang // Проблемы прочности. — 2015. — № 1. — С. 224-230. — Бібліогр.: 17 назв. — англ. |
| series |
Проблемы прочности |
| work_keys_str_mv |
AT jisj mechanicalpropertiesandmachinabilityofglassfiberreinforcedpolyetheretherketone AT yuhj mechanicalpropertiesandmachinabilityofglassfiberreinforcedpolyetheretherketone AT zhaoj mechanicalpropertiesandmachinabilityofglassfiberreinforcedpolyetheretherketone AT liangfs mechanicalpropertiesandmachinabilityofglassfiberreinforcedpolyetheretherketone |
| first_indexed |
2023-10-18T22:33:45Z |
| last_indexed |
2023-10-18T22:33:45Z |
| _version_ |
1796155841700691968 |