Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping

Based on the principle of hot stamping, a simulation model of hot stamping was established. The blank contour line of U part was optimized by using a multiple iterative algorithm. By comparison with the simulation and experimental data, the multiple iterative optimization algorithm was verified. Mor...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2016
Автори: Zhang, Z.Q., Jia, X.F., Wang, Y.J., Gao, P.
Формат: Стаття
Мова:English
Опубліковано: Інститут проблем міцності ім. Г.С. Писаренко НАН України 2016
Назва видання:Проблемы прочности
Теми:
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/173421
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Цитувати:Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping / Z.Q. Zhang, X.F. Jia, Y.J. Wang, P. Gao // Проблемы прочности. — 2016. — № 1. — С. 91-96. — Бібліогр.: 11 назв. — англ.

Репозитарії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
id irk-123456789-173421
record_format dspace
spelling irk-123456789-1734212020-12-04T01:26:36Z Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping Zhang, Z.Q. Jia, X.F. Wang, Y.J. Gao, P. Научно-технический раздел Based on the principle of hot stamping, a simulation model of hot stamping was established. The blank contour line of U part was optimized by using a multiple iterative algorithm. By comparison with the simulation and experimental data, the multiple iterative optimization algorithm was verified. Moreover, the blank contour lines of a bumper and the B-pillar of Numisheet 2008 were optimized. The result showed that the multiple iterative method for optimizing initial blank contour line had high calculating speed and precision. The hot stamping parts’ contour lines match the ideal part contour lines quite well. 2016 Article Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping / Z.Q. Zhang, X.F. Jia, Y.J. Wang, P. Gao // Проблемы прочности. — 2016. — № 1. — С. 91-96. — Бібліогр.: 11 назв. — англ. 0556-171X http://dspace.nbuv.gov.ua/handle/123456789/173421 539.4 en Проблемы прочности Інститут проблем міцності ім. Г.С. Писаренко НАН України
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
collection DSpace DC
language English
topic Научно-технический раздел
Научно-технический раздел
spellingShingle Научно-технический раздел
Научно-технический раздел
Zhang, Z.Q.
Jia, X.F.
Wang, Y.J.
Gao, P.
Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping
Проблемы прочности
description Based on the principle of hot stamping, a simulation model of hot stamping was established. The blank contour line of U part was optimized by using a multiple iterative algorithm. By comparison with the simulation and experimental data, the multiple iterative optimization algorithm was verified. Moreover, the blank contour lines of a bumper and the B-pillar of Numisheet 2008 were optimized. The result showed that the multiple iterative method for optimizing initial blank contour line had high calculating speed and precision. The hot stamping parts’ contour lines match the ideal part contour lines quite well.
format Article
author Zhang, Z.Q.
Jia, X.F.
Wang, Y.J.
Gao, P.
author_facet Zhang, Z.Q.
Jia, X.F.
Wang, Y.J.
Gao, P.
author_sort Zhang, Z.Q.
title Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping
title_short Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping
title_full Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping
title_fullStr Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping
title_full_unstemmed Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping
title_sort optimization analysis of initial sheet metal contour line for high-strength boron steel in hot stamping
publisher Інститут проблем міцності ім. Г.С. Писаренко НАН України
publishDate 2016
topic_facet Научно-технический раздел
url http://dspace.nbuv.gov.ua/handle/123456789/173421
citation_txt Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping / Z.Q. Zhang, X.F. Jia, Y.J. Wang, P. Gao // Проблемы прочности. — 2016. — № 1. — С. 91-96. — Бібліогр.: 11 назв. — англ.
series Проблемы прочности
work_keys_str_mv AT zhangzq optimizationanalysisofinitialsheetmetalcontourlineforhighstrengthboronsteelinhotstamping
AT jiaxf optimizationanalysisofinitialsheetmetalcontourlineforhighstrengthboronsteelinhotstamping
AT wangyj optimizationanalysisofinitialsheetmetalcontourlineforhighstrengthboronsteelinhotstamping
AT gaop optimizationanalysisofinitialsheetmetalcontourlineforhighstrengthboronsteelinhotstamping
first_indexed 2023-10-18T22:34:04Z
last_indexed 2023-10-18T22:34:04Z
_version_ 1796155855283945472