FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
The clinching tool with a die of 5 mm diameter with a specially formed gap and a punch of 3.6 mm diameter were used for mechanical joining of dual-phase steel sheets DP600 with the pressing force of 30 kN. The punch and die were deposited by PVD coating of CrN type with LARC technology. The coating...
Збережено в:
| Дата: | 2016 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Назва видання: | Проблемы прочности |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/173508 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels / L. Kaščák, E. Spišák, R. Kubik, J. Mucha // Проблемы прочности. — 2016. — № 4. — С. 74-80. — Бібліогр.: 11 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
irk-123456789-173508 |
|---|---|
| record_format |
dspace |
| spelling |
irk-123456789-1735082020-12-08T01:26:59Z FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels Kaščák, L. Spišák, E. Kubik, R. Mucha, J. Научно-технический раздел The clinching tool with a die of 5 mm diameter with a specially formed gap and a punch of 3.6 mm diameter were used for mechanical joining of dual-phase steel sheets DP600 with the pressing force of 30 kN. The punch and die were deposited by PVD coating of CrN type with LARC technology. The coating state of each 50th manufactured join was evaluated by SEM. Cracks in the area of punch’s radius were detected. The finite element method was applied for the assessment of punch load in the joining process. 2016 Article FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels / L. Kaščák, E. Spišák, R. Kubik, J. Mucha // Проблемы прочности. — 2016. — № 4. — С. 74-80. — Бібліогр.: 11 назв. — англ. 0556-171X http://dspace.nbuv.gov.ua/handle/123456789/173508 539.4 en Проблемы прочности Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| language |
English |
| topic |
Научно-технический раздел Научно-технический раздел |
| spellingShingle |
Научно-технический раздел Научно-технический раздел Kaščák, L. Spišák, E. Kubik, R. Mucha, J. FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels Проблемы прочности |
| description |
The clinching tool with a die of 5 mm diameter with a specially formed gap and a punch of 3.6 mm diameter were used for mechanical joining of dual-phase steel sheets DP600 with the pressing force of 30 kN. The punch and die were deposited by PVD coating of CrN type with LARC technology. The coating state of each 50th manufactured join was evaluated by SEM. Cracks in the area of punch’s radius were detected. The finite element method was applied for the assessment of punch load in the joining process. |
| format |
Article |
| author |
Kaščák, L. Spišák, E. Kubik, R. Mucha, J. |
| author_facet |
Kaščák, L. Spišák, E. Kubik, R. Mucha, J. |
| author_sort |
Kaščák, L. |
| title |
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels |
| title_short |
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels |
| title_full |
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels |
| title_fullStr |
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels |
| title_full_unstemmed |
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels |
| title_sort |
fem analysis of clinching tool load in a joint of dual-phase steels |
| publisher |
Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| publishDate |
2016 |
| topic_facet |
Научно-технический раздел |
| url |
http://dspace.nbuv.gov.ua/handle/123456789/173508 |
| citation_txt |
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels / L. Kaščák, E. Spišák, R. Kubik, J. Mucha // Проблемы прочности. — 2016. — № 4. — С. 74-80. — Бібліогр.: 11 назв. — англ. |
| series |
Проблемы прочности |
| work_keys_str_mv |
AT kascakl femanalysisofclinchingtoolloadinajointofdualphasesteels AT spisake femanalysisofclinchingtoolloadinajointofdualphasesteels AT kubikr femanalysisofclinchingtoolloadinajointofdualphasesteels AT muchaj femanalysisofclinchingtoolloadinajointofdualphasesteels |
| first_indexed |
2023-10-18T22:34:16Z |
| last_indexed |
2023-10-18T22:34:16Z |
| _version_ |
1796155864509317120 |