Improved Method of Springback Compensation in Metal Forming Analysis
This paper presents an innovative compensation method for both forming and trimming die for the construction of vehicle parts manufactured by a transfer press. This method allows one to optimize the accuracy of compensation, consequently reducing springback in a more exact way than currently used me...
Збережено в:
| Дата: | 2016 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Назва видання: | Проблемы прочности |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/173509 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Improved Method of Springback Compensation in Metal Forming Analysis / P. Balon, A. Świątoniowski, J. Szostak // Проблемы прочности. — 2016. — № 4. — С. 81-92. — Бібліогр.: 19 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
irk-123456789-173509 |
|---|---|
| record_format |
dspace |
| spelling |
irk-123456789-1735092020-12-08T01:26:42Z Improved Method of Springback Compensation in Metal Forming Analysis Balon, P Świątoniowski, A. Szostak, J. Научно-технический раздел This paper presents an innovative compensation method for both forming and trimming die for the construction of vehicle parts manufactured by a transfer press. This method allows one to optimize the accuracy of compensation, consequently reducing springback in a more exact way than currently used methods, which account only for the influence of trimming on springback without generating compensated surfaces for the trimming die and the next forming operation. Moreover, there is a possibility to include the positioning effect during multioperation forming because of the huge impact of results on separate operations. When the positioning is not considered between operations there are problems with a proper shape even if the final part has the correct geometry. These problems generate some additional costs during the die production, which can be avoided by using the multioperation compensation. 2016 Article Improved Method of Springback Compensation in Metal Forming Analysis / P. Balon, A. Świątoniowski, J. Szostak // Проблемы прочности. — 2016. — № 4. — С. 81-92. — Бібліогр.: 19 назв. — англ. 0556-171X http://dspace.nbuv.gov.ua/handle/123456789/173509 539.4 en Проблемы прочности Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| language |
English |
| topic |
Научно-технический раздел Научно-технический раздел |
| spellingShingle |
Научно-технический раздел Научно-технический раздел Balon, P Świątoniowski, A. Szostak, J. Improved Method of Springback Compensation in Metal Forming Analysis Проблемы прочности |
| description |
This paper presents an innovative compensation method for both forming and trimming die for the construction of vehicle parts manufactured by a transfer press. This method allows one to optimize the accuracy of compensation, consequently reducing springback in a more exact way than currently used methods, which account only for the influence of trimming on springback without generating compensated surfaces for the trimming die and the next forming operation. Moreover, there is a possibility to include the positioning effect during multioperation forming because of the huge impact of results on separate operations. When the positioning is not considered between operations there are problems with a proper shape even if the final part has the correct geometry. These problems generate some additional costs during the die production, which can be avoided by using the multioperation compensation. |
| format |
Article |
| author |
Balon, P Świątoniowski, A. Szostak, J. |
| author_facet |
Balon, P Świątoniowski, A. Szostak, J. |
| author_sort |
Balon, P |
| title |
Improved Method of Springback Compensation in Metal Forming Analysis |
| title_short |
Improved Method of Springback Compensation in Metal Forming Analysis |
| title_full |
Improved Method of Springback Compensation in Metal Forming Analysis |
| title_fullStr |
Improved Method of Springback Compensation in Metal Forming Analysis |
| title_full_unstemmed |
Improved Method of Springback Compensation in Metal Forming Analysis |
| title_sort |
improved method of springback compensation in metal forming analysis |
| publisher |
Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| publishDate |
2016 |
| topic_facet |
Научно-технический раздел |
| url |
http://dspace.nbuv.gov.ua/handle/123456789/173509 |
| citation_txt |
Improved Method of Springback Compensation in Metal Forming Analysis / P. Balon, A. Świątoniowski, J. Szostak // Проблемы прочности. — 2016. — № 4. — С. 81-92. — Бібліогр.: 19 назв. — англ. |
| series |
Проблемы прочности |
| work_keys_str_mv |
AT balonp improvedmethodofspringbackcompensationinmetalforminganalysis AT swiatoniowskia improvedmethodofspringbackcompensationinmetalforminganalysis AT szostakj improvedmethodofspringbackcompensationinmetalforminganalysis |
| first_indexed |
2023-10-18T22:34:16Z |
| last_indexed |
2023-10-18T22:34:16Z |
| _version_ |
1796155864615223296 |