Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels

• Дата: 2016
• Автори: Jaworski, J., Trzepiecinski, T., Stachowicz, F.
• Формат: Стаття
• Мова: English
• Опубліковано: Інститут проблем міцності ім. Г.С. Писаренко НАН України 2016
• Назва видання: Проблемы прочности
• Теми: Научно-технический раздел
• Онлайн доступ: http://dspace.nbuv.gov.ua/handle/123456789/173512
• Назва журналу: Digital Library of Periodicals of National Academy of Sciences of Ukraine
• Цитувати: Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels / J. Jaworski, T. Trzepiecinski, F. Stachowicz // Проблемы прочности. — 2016. — № 4. — С. 110-118. — Бібліогр.: 31 назв. — англ.

The occurrence of defects caused by sharpening leads to the considerable variation of lifetime of cutting tools under identical process conditions. The loss of cutting ability of cutting tools or the change of the blade original geometry influences the quality of the surface finish as well as both dimensional and shape accuracy of workpieces. The effect of the grinding parameters on the surface finish of selected high-speed steels has been investigated. The influence of the grinding parameters has been defined especially for surface roughness, grinding forces and grinding ratio with a wide range of grinding parameters. It is found that the value of average roughness (Ra ) parameter decreases together with an increase in the grinding depth and the feed length. Furthermore, the value of Ra increases proportionally to the grinding depth. To increase the efficiency of sharpening, it is required to increase the feed length other than the grinding depth.