Analysis of Cutting Surface During Cutting of Electric Sheets
The contribution evaluates the influence of the size of the cutting gap on the quality of the cutting surface during the cutting process. Four types of electrical sheets were evaluated. Examined sheet types have the nominal thickness of 0.65 and 0.5 mm. Sheets differ in mechanical properties (yield...
Збережено в:
| Видавець: | Інститут проблем міцності ім. Г.С. Писаренко НАН України |
|---|---|
| Дата: | 2017 |
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2017
|
| Назва видання: | Проблемы прочности |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/173696 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Цитувати: | Analysis of Cutting Surface During Cutting of Electric Sheets / E. Spišák, L. Kaščák, J. Majerníková, M. Džupon // Проблемы прочности. — 2017. — № 4. — С. 135-142. — Бібліогр.: 8 назв. — англ. |
Репозиторії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
irk-123456789-173696 |
|---|---|
| record_format |
dspace |
| spelling |
irk-123456789-1736962020-12-17T01:26:06Z Analysis of Cutting Surface During Cutting of Electric Sheets Spišák, E. Kaščák, L. Majerníková, J. Džupon, M. Научно-технический раздел The contribution evaluates the influence of the size of the cutting gap on the quality of the cutting surface during the cutting process. Four types of electrical sheets were evaluated. Examined sheet types have the nominal thickness of 0.65 and 0.5 mm. Sheets differ in mechanical properties (yield strength, ultimate tensile strength, and elongation). For the impact analysis, four values of the 0.02, 0.05, 0.1, and 0.2 mm cutting gap were used. Анализируется влияние величины зазора резки на качество поверхности реза при обработке резанием. Исследовались четыре типа электротехнических листов с номинальной толщиной 0,65 и 0,5 мм и различными механическими характеристиками (предел текучести, предел прочности при растяжении и относительное удлинение). Для анализа влияния указанных факторов использовались четыре значения зазора резки: 0,02; 0,05; 0,1 и 0,2 мм. 2017 Article Analysis of Cutting Surface During Cutting of Electric Sheets / E. Spišák, L. Kaščák, J. Majerníková, M. Džupon // Проблемы прочности. — 2017. — № 4. — С. 135-142. — Бібліогр.: 8 назв. — англ. 0556-171X http://dspace.nbuv.gov.ua/handle/123456789/173696 539.4 en Проблемы прочности Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| language |
English |
| topic |
Научно-технический раздел Научно-технический раздел |
| spellingShingle |
Научно-технический раздел Научно-технический раздел Spišák, E. Kaščák, L. Majerníková, J. Džupon, M. Analysis of Cutting Surface During Cutting of Electric Sheets Проблемы прочности |
| description |
The contribution evaluates the influence of the size of the cutting gap on the quality of the cutting surface during the cutting process. Four types of electrical sheets were evaluated. Examined sheet types have the nominal thickness of 0.65 and 0.5 mm. Sheets differ in mechanical properties (yield strength, ultimate tensile strength, and elongation). For the impact analysis, four values of the 0.02, 0.05, 0.1, and 0.2 mm cutting gap were used. |
| format |
Article |
| author |
Spišák, E. Kaščák, L. Majerníková, J. Džupon, M. |
| author_facet |
Spišák, E. Kaščák, L. Majerníková, J. Džupon, M. |
| author_sort |
Spišák, E. |
| title |
Analysis of Cutting Surface During Cutting of Electric Sheets |
| title_short |
Analysis of Cutting Surface During Cutting of Electric Sheets |
| title_full |
Analysis of Cutting Surface During Cutting of Electric Sheets |
| title_fullStr |
Analysis of Cutting Surface During Cutting of Electric Sheets |
| title_full_unstemmed |
Analysis of Cutting Surface During Cutting of Electric Sheets |
| title_sort |
analysis of cutting surface during cutting of electric sheets |
| publisher |
Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| publishDate |
2017 |
| topic_facet |
Научно-технический раздел |
| url |
http://dspace.nbuv.gov.ua/handle/123456789/173696 |
| citation_txt |
Analysis of Cutting Surface During Cutting of Electric Sheets / E. Spišák, L. Kaščák, J. Majerníková, M. Džupon // Проблемы прочности. — 2017. — № 4. — С. 135-142. — Бібліогр.: 8 назв. — англ. |
| series |
Проблемы прочности |
| work_keys_str_mv |
AT spisake analysisofcuttingsurfaceduringcuttingofelectricsheets AT kascakl analysisofcuttingsurfaceduringcuttingofelectricsheets AT majernikovaj analysisofcuttingsurfaceduringcuttingofelectricsheets AT dzuponm analysisofcuttingsurfaceduringcuttingofelectricsheets |
| first_indexed |
2023-10-18T22:34:42Z |
| last_indexed |
2023-10-18T22:34:42Z |
| _version_ |
1796155883672043520 |