Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die
For studying the temperature field of hot stamping, the effect of the distance between cooling pipes, the distance between the cooling pipe and mold surface, and the water cooling pipe diameter were evaluated with ANSYS software. The results showed that the maximum temperature was about 50°C, and th...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2018
|
| Назва видання: | Проблемы прочности |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/173822 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die / Q.Y. Jiang, H.Y Zhao, H.F. Yan // Проблемы прочности. — 2018. — № 1. — С. 138-143. — Бібліогр.: 8 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
irk-123456789-173822 |
|---|---|
| record_format |
dspace |
| spelling |
irk-123456789-1738222020-12-22T01:26:04Z Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die Jiang, Q.Y. Zhao, H.Y, Yan, H.F. Научно-технический раздел For studying the temperature field of hot stamping, the effect of the distance between cooling pipes, the distance between the cooling pipe and mold surface, and the water cooling pipe diameter were evaluated with ANSYS software. The results showed that the maximum temperature was about 50°C, and the maximum temperature difference of hot stamping was less than 35°C. The maximum temperature and the uniformity of stamping temperature can be improved by controlling the size and spacing of cooling pipes. Определен эффект расстояния между трубами охлаждения, расстояния между трубой охлаждения и поверхностью формы и диаметра трубы водяного охлаждения на температурное поле горячей штамповки с использованием программного обеспечения ANSYS. Показано, что максимальная температура составляет примерно 50°С, а максимальный перепад температуры горячей штамповки менее 35°С. Регулирование размеров и расстояния между трубами охлаждения позволяет увеличить максимальную температуру и равномерность распределения температуры штамповки. 2018 Article Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die / Q.Y. Jiang, H.Y Zhao, H.F. Yan // Проблемы прочности. — 2018. — № 1. — С. 138-143. — Бібліогр.: 8 назв. — англ. 0556-171X http://dspace.nbuv.gov.ua/handle/123456789/173822 539.4 en Проблемы прочности Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| language |
English |
| topic |
Научно-технический раздел Научно-технический раздел |
| spellingShingle |
Научно-технический раздел Научно-технический раздел Jiang, Q.Y. Zhao, H.Y, Yan, H.F. Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die Проблемы прочности |
| description |
For studying the temperature field of hot stamping, the effect of the distance between cooling pipes, the distance between the cooling pipe and mold surface, and the water cooling pipe diameter were evaluated with ANSYS software. The results showed that the maximum temperature was about 50°C, and the maximum temperature difference of hot stamping was less than 35°C. The maximum temperature and the uniformity of stamping temperature can be improved by controlling the size and spacing of cooling pipes. |
| format |
Article |
| author |
Jiang, Q.Y. Zhao, H.Y, Yan, H.F. |
| author_facet |
Jiang, Q.Y. Zhao, H.Y, Yan, H.F. |
| author_sort |
Jiang, Q.Y. |
| title |
Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die |
| title_short |
Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die |
| title_full |
Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die |
| title_fullStr |
Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die |
| title_full_unstemmed |
Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die |
| title_sort |
numerical simulation of the thermomechanical behavior of a hot stamping die |
| publisher |
Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| publishDate |
2018 |
| topic_facet |
Научно-технический раздел |
| url |
http://dspace.nbuv.gov.ua/handle/123456789/173822 |
| citation_txt |
Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die / Q.Y. Jiang, H.Y Zhao, H.F. Yan // Проблемы прочности. — 2018. — № 1. — С. 138-143. — Бібліогр.: 8 назв. — англ. |
| series |
Проблемы прочности |
| work_keys_str_mv |
AT jiangqy numericalsimulationofthethermomechanicalbehaviorofahotstampingdie AT zhaohy numericalsimulationofthethermomechanicalbehaviorofahotstampingdie AT yanhf numericalsimulationofthethermomechanicalbehaviorofahotstampingdie |
| first_indexed |
2023-10-18T22:34:59Z |
| last_indexed |
2023-10-18T22:34:59Z |
| _version_ |
1796155896207769600 |