Effect of Si and Mn on Microstructure and Mechanical Properties of Vacuum Suction Casting Al–4.5Cu Alloy
The high performance of alloys is dependent on microstructure, while alloying elements have significant influence on microstructure. In order to study the effect of Si and Mn elements on the microstructure and mechanical properties, different content of alloying elements, Si and Mn, are added into t...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2018
|
| Назва видання: | Проблемы прочности |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/173944 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Effect of Si and Mn on Microstructure and Mechanical Properties of Vacuum Suction Casting Al–4.5Cu Alloy / T. He, H. Liu, X. Shi, Y. Huo, M. Li, T. Pan // Проблемы прочности. — 2018. — № 4. — С. 179-188. — Бібліогр.: 18 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The high performance of alloys is dependent on microstructure, while alloying elements have significant influence on microstructure. In order to study the effect of Si and Mn elements on the microstructure and mechanical properties, different content of alloying elements, Si and Mn, are added into the matrix Al–4.5Cu alloy. The compounded alloys (CA) are prepared by vacuum suction casting. The microstructure of CA is investigated by a scanning electron microscope (SEM). The mechanical properties are tested by a universal testing machine and a microhardness tester. Analysis is conducted by comparing experimental results of CA with different content of Si and Mn. |
|---|