Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
The thermosetting plastic and stainless steel were joined with a fiber laser. The influence of processing parameters on the joint was studied. The laser scanning on stainless steel is shown to result in the formation of the heat-affected and fusion zones. In the first zone, lathy ferrite precipitate...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2018
|
| Назва видання: | Проблемы прочности |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/173994 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel / L.Y. Sheng, J.K. Jiao, C. Lai // Проблемы прочности. — 2018. — № 5. — С. 76-88. — Бібліогр.: 27 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
irk-123456789-173994 |
|---|---|
| record_format |
dspace |
| spelling |
irk-123456789-1739942020-12-29T01:26:18Z Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel Sheng, L.Y. Jiao, J.K. Lai, C. Научно-технический раздел The thermosetting plastic and stainless steel were joined with a fiber laser. The influence of processing parameters on the joint was studied. The laser scanning on stainless steel is shown to result in the formation of the heat-affected and fusion zones. In the first zone, lathy ferrite precipitates along the boundary, which modifies austenite, while in the second zone, ferrite forms the skeleton structure and separates austenite into a small cellular structure. Выполнено соединение реактопласта и нержавеющей стали с помощью волоконного лазера. Изучено влияние технологических параметров на качество соединения. Показано, что сканирование поверхности нержавеющей стали лазерным лучом приводит к образованию зон термического влияния и проплавления. 2018 Article Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel / L.Y. Sheng, J.K. Jiao, C. Lai // Проблемы прочности. — 2018. — № 5. — С. 76-88. — Бібліогр.: 27 назв. — англ. 0556-171X http://dspace.nbuv.gov.ua/handle/123456789/173994 539.4 en Проблемы прочности Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| language |
English |
| topic |
Научно-технический раздел Научно-технический раздел |
| spellingShingle |
Научно-технический раздел Научно-технический раздел Sheng, L.Y. Jiao, J.K. Lai, C. Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel Проблемы прочности |
| description |
The thermosetting plastic and stainless steel were joined with a fiber laser. The influence of processing parameters on the joint was studied. The laser scanning on stainless steel is shown to result in the formation of the heat-affected and fusion zones. In the first zone, lathy ferrite precipitates along the boundary, which modifies austenite, while in the second zone, ferrite forms the skeleton structure and separates austenite into a small cellular structure. |
| format |
Article |
| author |
Sheng, L.Y. Jiao, J.K. Lai, C. |
| author_facet |
Sheng, L.Y. Jiao, J.K. Lai, C. |
| author_sort |
Sheng, L.Y. |
| title |
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel |
| title_short |
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel |
| title_full |
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel |
| title_fullStr |
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel |
| title_full_unstemmed |
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel |
| title_sort |
assessment of the microstructure and mechanical properties of a laser-joined carbon fiber-reinforced thermosetting plastic and stainless steel |
| publisher |
Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| publishDate |
2018 |
| topic_facet |
Научно-технический раздел |
| url |
http://dspace.nbuv.gov.ua/handle/123456789/173994 |
| citation_txt |
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel / L.Y. Sheng, J.K. Jiao, C. Lai // Проблемы прочности. — 2018. — № 5. — С. 76-88. — Бібліогр.: 27 назв. — англ. |
| series |
Проблемы прочности |
| work_keys_str_mv |
AT shengly assessmentofthemicrostructureandmechanicalpropertiesofalaserjoinedcarbonfiberreinforcedthermosettingplasticandstainlesssteel AT jiaojk assessmentofthemicrostructureandmechanicalpropertiesofalaserjoinedcarbonfiberreinforcedthermosettingplasticandstainlesssteel AT laic assessmentofthemicrostructureandmechanicalpropertiesofalaserjoinedcarbonfiberreinforcedthermosettingplasticandstainlesssteel |
| first_indexed |
2023-10-18T22:35:22Z |
| last_indexed |
2023-10-18T22:35:22Z |
| _version_ |
1796155913614131200 |