Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites

Thermoplastic starch-based composites generate worldwide interest as they are based on green raw materials and undergo complete degradation. The composites were first fabricated from starch and sisal fibers as the major materials via the forming process. The effect of starches with different content...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2019
Автори: Guo, A.F., Li, J.F., Li, F.Y., Xu, J., Zhang, C.W., Chen, S.
Формат: Стаття
Мова:English
Опубліковано: Інститут проблем міцності ім. Г.С. Писаренко НАН України 2019
Назва видання:Проблемы прочности
Теми:
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/188299
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Цитувати:Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites / A.F. Guo, J.F. Li, F.Y. Li, J. Xu, C.W. Zhang, S. Chen // Проблеми міцності. — 2019. — № 1. — С. 24-31. — Бібліогр.: 25 назв. — англ.

Репозитарії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
Опис
Резюме:Thermoplastic starch-based composites generate worldwide interest as they are based on green raw materials and undergo complete degradation. The composites were first fabricated from starch and sisal fibers as the major materials via the forming process. The effect of starches with different contents of single- and multicomponent plasticizers on the cushioning properties of the composites was studied. An increase in plasticizer contents within a certain range is shown to enhance materials resistance to pressure and its cushioning performance. With the multicomponent plasticizer content of 15%, the resistance to pressure for four types of composites prepared at different weight ratios of formamide and urea were of the order of 2:1>1:1>1:2, and that of the four types of composites fabricated at different weight ratios of glycerol and ethylene glycol were of the order of 1:2>2:1>1:1. Multicomponent plasticizer-containing starch-based composites are shown to be irregular elastomers and the stress-strain relation to be first defined by a hyperbolic tangent curve function and then by the tangent one.