Findif code simulations of OP-1.1 Wendelstein 7-X discharges
The current development state of the finite difference, multi-fluid, 3D plasma code Findif is detailed. The code was run on four meshes prepared for the OP-1.1 wall geometry of the Wendelstein 7-X stellarator. The meshes were produced for 4 magnetic configurations; two of them are finite-beta (non v...
Збережено в:
| Дата: | 2019 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2019
|
| Назва видання: | Вопросы атомной науки и техники |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/194579 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Findif code simulations of OP-1.1 Wendelstein 7-X discharges / G. Pełka, W. Stępniewski, R. Zagórski, W7-X Team // Problems of atomic science and tecnology. — 2019. — № 1. — С. 27-29. — Бібліогр.: 5 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The current development state of the finite difference, multi-fluid, 3D plasma code Findif is detailed. The code was run on four meshes prepared for the OP-1.1 wall geometry of the Wendelstein 7-X stellarator. The meshes were produced for 4 magnetic configurations; two of them are finite-beta (non vacuum). The simulated volume covers plasma edge; the computations of limiter heat load distributions were the main goal. Plasma radiation was not taken into account. |
|---|