The efficiency of radiation shielding made from materials with high atomic number and low mass density
The radiation shielding from γ-quanta of the existing transport containers (TC) for transportation of spent nuclear fuel (SNF) is made of steel or steel plus Pb 25…30 cm thick and weighting ⁓ 60…80 t. The application of materials with high atomic number, dispersed (solids grinded to a powdery state)...
Збережено в:
Дата: | 2021 |
---|---|
Автори: | , , , |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2021
|
Назва видання: | Вопросы атомной науки и техники |
Теми: | |
Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/194895 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
Цитувати: | The efficiency of radiation shielding made from materials with high atomic number and low mass density / V.G. Rudychev, M.O. Azarenkov, I.O. Girka, Y.V. Rudychev // Problems of Atomic Science and Technology. — 2021. — № 2. — С. 74-79. — Бібліогр.: 7 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of UkraineРезюме: | The radiation shielding from γ-quanta of the existing transport containers (TC) for transportation of spent nuclear fuel (SNF) is made of steel or steel plus Pb 25…30 cm thick and weighting ⁓ 60…80 t. The application of materials with high atomic number, dispersed (solids grinded to a powdery state) to the densities in the range 4 < ρ < 8 g/cm³, is investigated. Simulations based on the Monte Carlo method show that at the densities of dispersed depleted U larger than 5 g/cm³ and shielding thicknesses of more than 30 cm, the absorption of γ-quanta of SNF is greater than that of the shielding made of steel of the same thickness. The application of such materials, while the weight characteristics of the shields are not exceeded, provides radiation shielding for SNF with the high burnup rate and the smaller cooling time or larger amount of the transported SNF. |
---|