Goniometer control
The control unit for the goniometer has been developed and manufactured. The unit includes four independent programmable stepper motor control channels, three logical channels for analyzing the state of limit switches and a power supply. Powerful field-effect transistors of the company International...
Збережено в:
| Дата: | 2021 |
|---|---|
| Автори: | , , , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2021
|
| Назва видання: | Вопросы атомной науки и техники |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/195104 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Goniometer control / G.P. Vasiliev, G.D. Kovalenko, N.I. Maslov, V.D. Ovchinnik, M.Yu. Shulika, I.N. Shliakhov, V.I. Yalovenko // Problems of Atomic Science and Technology. — 2021. — № 3. — С. 61-63. — Бібліогр.: 1 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The control unit for the goniometer has been developed and manufactured. The unit includes four independent programmable stepper motor control channels, three logical channels for analyzing the state of limit switches and a power supply. Powerful field-effect transistors of the company International Rectifier are used as controlled power switches. To generate output signals and communicate with a computer, an ATmega328 microprocessor is used in each control channel. This channel design allows you to control almost any type of stepper motors, you only need to replace the control program. The software is written using the WinAVR package which has a General Public License. Data transfer between the computer and the unit is carried out via the USB interface. |
|---|