Methods for control the self-sustained plasma-beam discharge at high energy density
Three methods for control the self-sustained plasma-beam discharge at high energy density are presented in this paper. Using a particular method, it is possible to set the location of the double layers formation in the discharge gap, as well as control its parameters at the high-current inductive di...
Збережено в:
| Дата: | 2019 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2019
|
| Назва видання: | Вопросы атомной науки и техники |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/195198 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Methods for control the self-sustained plasma-beam discharge at high energy density / Ya.O. Hrechko, N.A. Azarenkov, A.F. Tseluyko, D.L. Ryabchikov, I.N. Sereda // Problems of atomic science and technology. — 2019. — № 4. — С. 151-154. — Бібліогр.: 7 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | Three methods for control the self-sustained plasma-beam discharge at high energy density are presented in this paper. Using a particular method, it is possible to set the location of the double layers formation in the discharge gap, as well as control its parameters at the high-current inductive discharge stage. It is shown that such methods can significantly increase the active power inputted into the discharge. |
|---|