The development of a three-dimensional model of WWER-1000 core using the Monte Carlo Serpent code for neutron-physical modeling
The article presents the use of the new Monte Carlo Serpent code for 3D modeling of the WWER-1000 reactor core. Core models for the first loading of RNPP4 and the 28th loading of SUNPP3, the fuel assemblies’ models of different manufacturers were developed and presented. Considerable attention was p...
Збережено в:
| Дата: | 2019 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2019
|
| Назва видання: | Вопросы атомной науки и техники |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/195215 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | The development of a three-dimensional model of WWER-1000 core using the Monte Carlo Serpent code for neutron-physical modeling / V.I. Gulik, O.R. Trofymenko, V.V. Galchenko, D.V. Budik // Problems of atomic science and technology. — 2019. — № 5. — С. 58-61. — Бібліогр.: 9 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The article presents the use of the new Monte Carlo Serpent code for 3D modeling of the WWER-1000 reactor core. Core models for the first loading of RNPP4 and the 28th loading of SUNPP3, the fuel assemblies’ models of different manufacturers were developed and presented. Considerable attention was paid to the detailed modeling of the upper, lower and side reflectors. Validation calculations of the Monte Carlo Serpent code for the WWER-1000 reactor were performed on the basis of the first RNPP4 loading. For the 28th loading of SUNPP3, albedo coefficients for radial and axial reflectors were obtained. |
|---|