Choice of basic construction parameters of steam generators for NPP of low power

• Дата: 2019
• Автори: Kravchenko, V.P., Sereda, R.M., Zhou Xiaolong, Visotskii, Yu.I., Rybakov, А.Н.
• Формат: Стаття
• Мова: English
• Опубліковано: Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2019
• Назва видання: Вопросы атомной науки и техники
• Теми: Problems of modern nuclear power engineering
• Онлайн доступ: http://dspace.nbuv.gov.ua/handle/123456789/195217
• Назва журналу: Digital Library of Periodicals of National Academy of Sciences of Ukraine
• Цитувати: Choice of basic construction parameters of steam generators for NPP of low power / V.P. Kravchenko, R.M. Sereda, Zhou Xiaolong, Yu.I. Visotskii, А.Н. Rybakov // Problems of atomic science and technology. — 2019. — № 5. — С. 62-68. — Бібліогр.: 11 назв. — англ.

Designs and methods for calculating a steam generator (SG) for low power NPPs are considered. As a prototype adopted SG nuclear power plant type KLT-40C (RF). The general list of work in the design of SG is given. A methodology for the structural calculation of SG with a coil heating surface, as well as a mathematical model of SG, have been developed, including structural, thermal, hydraulic, strength and economic calculations. The derivation of formulas for determining the wall thickness of heat transfer tubes (HTT) and the number of concentric layers of coils is described. The methodology for determining the main dimensions of the vessel, shaft and flat cover. Using the developed computer program, the optimal diameter of the HTT, the distances between the heat transfer tubes in the layer and between the layers, the feedwater speed at the inlet to the heat transfer tubes were determined.