Validation of the Geiger-Muller counter model of BDMG-04-02 using the Monte-Carlo technique
The model of the Geiger-Muller counter as the internal part of BDMG-04-02 detection unit in the calibration fa- cility UPGD-2 was developedin MCNP6.2. The different methods are used for the determination of the Geiger-Muller counter response. The F1 and F8 tally applicability is briefly described. B...
Збережено в:
| Дата: | 2021 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2021
|
| Назва видання: | Вопросы атомной науки и техники |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/195814 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Validation of the Geiger-Muller counter model of BDMG-04-02 using the Monte-Carlo technique / Yu. Fylonych, V. Zaporozhan, O. Balashevskyi // Problems of Atomic Science and Technology. — 2021. — № 6. — С. 149-154. — Бібліогр.: 23 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The model of the Geiger-Muller counter as the internal part of BDMG-04-02 detection unit in the calibration fa- cility UPGD-2 was developedin MCNP6.2. The different methods are used for the determination of the Geiger-Muller counter response. The F1 and F8 tally applicability is briefly described. BDMG-04-02 model was validated by comparative analysis of the calculated results and experimental values of the counter responses that obtained on the UPGD-2 calibration facility. Additionally, the absolute, geometric and intrinsic registration efficiency of BDMG-04-02 was determined. The paper has been emphasized the disadvantages of using the method of direct counting of the electrons on the surface of the Geiger-Muller counter (F1). |
|---|