Interval models of temperature characteristics of superheater separators in nuclear power plant units with the capacity of 1000 MW

• Дата: 2022
• Автори: Yefimov, O.V., Potanina, T.V., Kavertsev, V.L., Harkusha, T.A., Yesypenko, Т.O.
• Формат: Стаття
• Мова: English
• Опубліковано: Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2022
• Назва видання: Вопросы атомной науки и техники
• Теми: Physics and technology of structural materials
• Онлайн доступ: http://dspace.nbuv.gov.ua/handle/123456789/195922
• Назва журналу: Digital Library of Periodicals of National Academy of Sciences of Ukraine
• Цитувати: Interval models of temperature characteristics of superheater separators in nuclear power plant units with the capacity of 1000 MW / O.V. Yefimov, T.V. Potanina, V.L. Kavertsev, T.A. Harkusha, Т.O. Yesypenko // Problems of Atomic Science and Technology. — 2022. — № 1. — С. 161-168. — Бібліогр.: 28 назв. — англ.

The analysis of the influence of changes in the parameters of steam superheater separators SHS-1000 of nuclear power plant units with the capacity of 1000 MW on the efficiency and safety of their operation, including the temperature characteristics at the nominal and partial operating modes of power units, has been carried out. Based on the experimental data of the thermal tests of the power unit, the temperature characteristic of the second stage of the SHS-1000 has been constructed in the form of the dependence of the temperature change of the heated steam at the second stage of the SHS on the change in the operating mode of the power unit. To create a correct mathematical model of this dependence, taking into account the limited amount of experimental data and the uncertainty of information about the structure and the probabilistic nature of measurement error during testing, the use of numerical methods of interval analysis has been proposed. Interval analysis has allowed to obtain an interval model that describes the receiver, which contains all possible values of the dependence of temperature change of the heated steam at the second stage of SHS on the unit operating mode (the electrical load). It has been shown that in conditions of limited initial data and uncertainty of information about it, numerical methods of interval analysis allow to create interval models of operational (energy) characteristics technological processes and equipment of NPP units with the maximum possible correspondence to real processes and objects, which is important to ensure high efficiency and safe operation of power units.