CT study of products from non-metallic composites reinforced by carbon fibers
Computerized tomography is used to study products from non-metallic composites reinforced by carbon fibers. It is demonstrated that samples do not rotate during the analysis process and can have diameter not exceeding the gantry hole (75 cm) of the unit. The weight of samples can be up to 200 kg, an...
Збережено в:
| Видавець: | Національний науковий центр «Харківський фізико-технічний інститут» НАН України |
|---|---|
| Дата: | 2022 |
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2022
|
| Назва видання: | Вопросы атомной науки и техники |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/195956 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Цитувати: | CT study of products from non-metallic composites reinforced by carbon fibers / V.V. Levenets, I.V. Gurin, M.A. Ovchinnikova, Ye.V. Gurina // Problems of Atomic Science and Technology. — 2022. — № 2. — С. 82-86. — Бібліогр.: 11 назв. — англ. |
Репозиторії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | Computerized tomography is used to study products from non-metallic composites reinforced by carbon fibers. It is demonstrated that samples do not rotate during the analysis process and can have diameter not exceeding the gantry hole (75 cm) of the unit. The weight of samples can be up to 200 kg, and the length during one-time testing does not exceed 150 cm. The results of spatial calibration of the technology are shown using a set of copper wires with diameters from 0.56 to 0.05 mm. The paper presents the results of defects detecting in products in the form of gas pores and metal inclusions. |
|---|