Peculiarities of the formation of scincillation response in organic materials with stochastic character of light propagation

The paper examines the possibility of using an organic polycrystal as the “opaque” scintillator. Polycrystals are produced by pressing crystalline grains. When light propagates through a polycrystal, it is repeatedly reflected and refracted at the boundaries of the grains. This makes its propagation...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2023
Автори: Polupan, Ya.I., Lazarev, I.V., Martynenko, E.V., Minenko, S.S., Tarasenko, O.A., Тarasov, V.A.
Формат: Стаття
Мова:English
Опубліковано: Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2023
Назва видання:Problems of Atomic Science and Technology
Теми:
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/196135
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Цитувати:Peculiarities of the formation of scincillation response in organic materials with stochastic character of light propagation / Ya.I. Polupan, I.V. Lazarev, E.V. Martynenko, S.S. Minenko, O.A. Tarasenko, V.A. Тarasov // Problems of Atomic Science and Technology. — 2023. — № 3. — С. 38-42. — Бібліогр.: 10 назв. — англ.

Репозитарії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
Опис
Резюме:The paper examines the possibility of using an organic polycrystal as the “opaque” scintillator. Polycrystals are produced by pressing crystalline grains. When light propagates through a polycrystal, it is repeatedly reflected and refracted at the boundaries of the grains. This makes its propagation difficult. We studied the light output and optical transmittance of stilbene and p-terphenyl polycrystals with different fractions of crystalline grain: from 0.06…0.1 to 2.0…2.5 mm (the samples 20 mm in diameter and 2 mm in height) was conducted. Modelling of light propagation in polycrystalline samples of stilbene and p-terphenyl was carried out and the values of the light collection coefficients were calculated. It was found that in order to obtain the polycrystalline samples with sufficiently high light output and high efficiency of detection of local sites of interaction of ionizing radiations, grains in the range of 0.4…0.8 mm should be used.