Analysis of Al2O3 layers morphology and microstructure

The paper presents the characterization of obtaining Al2O3 oxide layers on aluminium AlMg2 alloy as a result of hard anodizing by the electrolytic method in a three-component electrolyte. The Al2O3 layers obtained on the AlMg2 alloy in the three-component SBS electrolyte were subjected to detailed m...

Повний опис

Збережено в:
Бібліографічні деталі
Видавець:Фізико-механічний інститут ім. Г.В. Карпенка НАН України
Дата:2010
Автор: Skoneczny, W.
Формат: Стаття
Мова:English
Опубліковано: Фізико-механічний інститут ім. Г.В. Карпенка НАН України 2010
Назва видання:Фізико-хімічна механіка матеріалів
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/31772
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Цитувати:Analysis of Al2O3 layers morphology and microstructure / W Skoneczny // Фізико-хімічна механіка матеріалів. — 2010. — Т. 46, № 2. — С. 130-135. — Бібліогр.: 8 назв. — англ.

Репозиторії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
id irk-123456789-31772
record_format dspace
spelling irk-123456789-317722012-03-18T12:26:58Z Analysis of Al2O3 layers morphology and microstructure Skoneczny, W. The paper presents the characterization of obtaining Al2O3 oxide layers on aluminium AlMg2 alloy as a result of hard anodizing by the electrolytic method in a three-component electrolyte. The Al2O3 layers obtained on the AlMg2 alloy in the three-component SBS electrolyte were subjected to detailed microstructural investigations (by means of a scanning electron microscope, SEM). By applying X-ray diffraction, examination of the obtained oxide layers phase compositions was carried out. It was found that the Al2O3 oxide layers obtained via hard anodizing in a three-component electrolyte are amorphous. The chemical composition of the Al2O3 layers is presented and compared to the results of stechiometric calculations for the Al2O3 layer. Surface morphologies of the obtained oxide layers are characterized and discussed in nano- and microscopic scales. The surface morphologies of the layers obtained have a significant influence on their properties, including their susceptibility to further modification (e.g. to incorporation of graphite), their wear resistance and the capacity for sorption of lubricants. Описано спосіб отримання оксидних покривів на основі Al2O3, сформованих на підкладці сплаву AlMg2 анодуванням у трикомпонентному електроліті. Мікроструктурні особливості шарів Al2O3 досліджено за допомогою сканівного електронного мікроскопа (SEM). Для вивчення фазового складу покривів використовували рентгенодифракційний аналіз. Виявлено, що оксидні покриви з Al2O3, отримані анодним оксидуванням у трикомпонентному електроліті, аморфні. Подано хімічний склад покривів та порівняно його з результатами стехіометричних обчислень. Проаналізовано морфологію поверхні оксидних покривів та обговорено їх поведінку на нано- та макрорівнях. Морфологія поверхні суттєво змінює інші властивості, зокрема, їх здатність до подальшої модифікації (включення графіту), зносотривкість та схильність до сорбції компонентів мастил. Описан способ получения оксидных покрытий на основе Al2O3, сформированных на подкладке сплава AlMg2 анодированием в трехкомпонентном электролите. Микроструктурные особенности слоев Al2O3 исследовано с помощью сканирующего электронного микроскопа (SEM). Для изучения фазового состава покрытий использован рентгенодифракионный анализ. Обнаружено, что оксидные покрытия из Al2O3, полученные анодным оксидированием в трехкомпонентном электролите, аморфны. Наведен химический состав покрытий и сравнено его с результатами стехиометрических расчетов. Проанализирована морфология поверхности оксидынх покрытий и обсуждено их поведение на нано- и макроуровнях. Морфология поверхности существенно изменяет другие свойства, в частности, их способность к дальнейшей модификации (включения графита), износостойкость и склонность к сорбции компонентов масла. 2010 Article Analysis of Al2O3 layers morphology and microstructure / W Skoneczny // Фізико-хімічна механіка матеріалів. — 2010. — Т. 46, № 2. — С. 130-135. — Бібліогр.: 8 назв. — англ. 0430-6252 http://dspace.nbuv.gov.ua/handle/123456789/31772 en Фізико-хімічна механіка матеріалів Фізико-механічний інститут ім. Г.В. Карпенка НАН України
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
collection DSpace DC
language English
description The paper presents the characterization of obtaining Al2O3 oxide layers on aluminium AlMg2 alloy as a result of hard anodizing by the electrolytic method in a three-component electrolyte. The Al2O3 layers obtained on the AlMg2 alloy in the three-component SBS electrolyte were subjected to detailed microstructural investigations (by means of a scanning electron microscope, SEM). By applying X-ray diffraction, examination of the obtained oxide layers phase compositions was carried out. It was found that the Al2O3 oxide layers obtained via hard anodizing in a three-component electrolyte are amorphous. The chemical composition of the Al2O3 layers is presented and compared to the results of stechiometric calculations for the Al2O3 layer. Surface morphologies of the obtained oxide layers are characterized and discussed in nano- and microscopic scales. The surface morphologies of the layers obtained have a significant influence on their properties, including their susceptibility to further modification (e.g. to incorporation of graphite), their wear resistance and the capacity for sorption of lubricants.
format Article
author Skoneczny, W.
spellingShingle Skoneczny, W.
Analysis of Al2O3 layers morphology and microstructure
Фізико-хімічна механіка матеріалів
author_facet Skoneczny, W.
author_sort Skoneczny, W.
title Analysis of Al2O3 layers morphology and microstructure
title_short Analysis of Al2O3 layers morphology and microstructure
title_full Analysis of Al2O3 layers morphology and microstructure
title_fullStr Analysis of Al2O3 layers morphology and microstructure
title_full_unstemmed Analysis of Al2O3 layers morphology and microstructure
title_sort analysis of al2o3 layers morphology and microstructure
publisher Фізико-механічний інститут ім. Г.В. Карпенка НАН України
publishDate 2010
url http://dspace.nbuv.gov.ua/handle/123456789/31772
citation_txt Analysis of Al2O3 layers morphology and microstructure / W Skoneczny // Фізико-хімічна механіка матеріалів. — 2010. — Т. 46, № 2. — С. 130-135. — Бібліогр.: 8 назв. — англ.
series Фізико-хімічна механіка матеріалів
work_keys_str_mv AT skonecznyw analysisofal2o3layersmorphologyandmicrostructure
first_indexed 2023-10-18T17:33:15Z
last_indexed 2023-10-18T17:33:15Z
_version_ 1796141850535395328