A Ductile Tear Fracture Analysis of Lap Welded Joints

Numerical analysis of the ductile fracture of lap welded joints has been performed for a standard CT specimen. Mono-, bi- and trimetallic CT configurations were studied in order to compare the J-integral and CTOD global approaches with a local approach (Rice and Tracey model). It is found that...

Повний опис

Збережено в:
Бібліографічні деталі
Видавець:Інститут проблем міцності ім. Г.С. Писаренко НАН України
Дата:2004
Автори: Imad, A., Nait Abdelaziz, М., Mesmacque, G.
Формат: Стаття
Мова:English
Опубліковано: Інститут проблем міцності ім. Г.С. Писаренко НАН України 2004
Назва видання:Проблемы прочности
Теми:
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/47101
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Цитувати:A Ductile Tear Fracture Analysis of Lap Welded Joints / A. Imad, M. Nait Abdelaziz, G. Mesmacque // Проблемы прочности. — 2004. — № 4. — С. 68-79. — Бібліогр.: 19 назв. — англ.

Репозиторії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
id irk-123456789-47101
record_format dspace
spelling irk-123456789-471012013-08-31T12:58:15Z A Ductile Tear Fracture Analysis of Lap Welded Joints Imad, A. Nait Abdelaziz, М. Mesmacque, G. Научно-технический раздел Numerical analysis of the ductile fracture of lap welded joints has been performed for a standard CT specimen. Mono-, bi- and trimetallic CT configurations were studied in order to compare the J-integral and CTOD global approaches with a local approach (Rice and Tracey model). It is found that the above change in configuration has no impact on evolution of the global parameters, while the void growth ratio R/R is very sensitive to the stress and strain fields around the crack tip. Furthermore, using the parameter R/Ro distribution at the crack tip, allowed us to predict the crack propagation direction in the case of lap welded joints. Выполнен численный расчет параметров вязкого разрушения компактных образцов, моделирующих сварное соединение внахлестку. Исследовались моно-, би- и триметаллические конфигурации компактных образцов с целью сравнения глобальных (J-интеграл и раскрытие вершины трещины) и локального (модель Райса-Трейси) подходов. Показано, что такие изменения конфигурации образцов не влияют на глобальные параметры, в то время как локальный параметр - коэффициент роста пор R/R0 - весьма чувствителен к изменению полей напряжений и деформаций в окрестности вершины трещины. Предлагается направление распространения трещины в случае сварного соединения внахлестку прогнозировать по распределению параметра R/R0 в окрестности вершины трещины. Виконано числовий розрахунок параметрів в’язкого руйнування компактних зразків, що моделюють зварне з ’єднання внапуск. Досліджували моно-, бі- та триметалічні конфігурації компактних зразків із метою порівняння глобальних (J-інтеграл та розкриття вістря тріщини) і локального (модель Райса-Трейсі) підходів. Показано, що такі зміни конфігурації зразків не впливають на глобальні параметри, в той час як локальний параметр - коефіцієнт росту пор R/R0 - дуже чутливий до зміни полів напружень і деформацій в околі вістря тріщини. Пропонується напрямок поширення тріщини у випадку зварного з ’єднання внапуск прогнозувати по розподілу параметра R/R0 в околі вістря тріщини. 2004 Article A Ductile Tear Fracture Analysis of Lap Welded Joints / A. Imad, M. Nait Abdelaziz, G. Mesmacque // Проблемы прочности. — 2004. — № 4. — С. 68-79. — Бібліогр.: 19 назв. — англ. 0556-171X http://dspace.nbuv.gov.ua/handle/123456789/47101 539.4 en Проблемы прочности Інститут проблем міцності ім. Г.С. Писаренко НАН України
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
collection DSpace DC
language English
topic Научно-технический раздел
Научно-технический раздел
spellingShingle Научно-технический раздел
Научно-технический раздел
Imad, A.
Nait Abdelaziz, М.
Mesmacque, G.
A Ductile Tear Fracture Analysis of Lap Welded Joints
Проблемы прочности
description Numerical analysis of the ductile fracture of lap welded joints has been performed for a standard CT specimen. Mono-, bi- and trimetallic CT configurations were studied in order to compare the J-integral and CTOD global approaches with a local approach (Rice and Tracey model). It is found that the above change in configuration has no impact on evolution of the global parameters, while the void growth ratio R/R is very sensitive to the stress and strain fields around the crack tip. Furthermore, using the parameter R/Ro distribution at the crack tip, allowed us to predict the crack propagation direction in the case of lap welded joints.
format Article
author Imad, A.
Nait Abdelaziz, М.
Mesmacque, G.
author_facet Imad, A.
Nait Abdelaziz, М.
Mesmacque, G.
author_sort Imad, A.
title A Ductile Tear Fracture Analysis of Lap Welded Joints
title_short A Ductile Tear Fracture Analysis of Lap Welded Joints
title_full A Ductile Tear Fracture Analysis of Lap Welded Joints
title_fullStr A Ductile Tear Fracture Analysis of Lap Welded Joints
title_full_unstemmed A Ductile Tear Fracture Analysis of Lap Welded Joints
title_sort ductile tear fracture analysis of lap welded joints
publisher Інститут проблем міцності ім. Г.С. Писаренко НАН України
publishDate 2004
topic_facet Научно-технический раздел
url http://dspace.nbuv.gov.ua/handle/123456789/47101
citation_txt A Ductile Tear Fracture Analysis of Lap Welded Joints / A. Imad, M. Nait Abdelaziz, G. Mesmacque // Проблемы прочности. — 2004. — № 4. — С. 68-79. — Бібліогр.: 19 назв. — англ.
series Проблемы прочности
work_keys_str_mv AT imada aductiletearfractureanalysisoflapweldedjoints
AT naitabdelazizm aductiletearfractureanalysisoflapweldedjoints
AT mesmacqueg aductiletearfractureanalysisoflapweldedjoints
AT imada ductiletearfractureanalysisoflapweldedjoints
AT naitabdelazizm ductiletearfractureanalysisoflapweldedjoints
AT mesmacqueg ductiletearfractureanalysisoflapweldedjoints
first_indexed 2023-10-18T18:06:42Z
last_indexed 2023-10-18T18:06:42Z
_version_ 1796143340963495936