Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit

S — N curve of austempered ductile iron was obtained in the range of lifetime including low cycle fatigue domain and high cycle fatigue domain up to 108 cycles. Ultimate tensile strength is used as a limiting value of the curve. Symmetric push-pull fatigue and tensile tests were performed at room te...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2008
Автори: Zapletal, J., Vechet, S., Kohout, J., Obrtlik, K.
Формат: Стаття
Мова:English
Опубліковано: Інститут проблем міцності ім. Г.С. Писаренко НАН України 2008
Назва видання:Проблемы прочности
Теми:
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/48240
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Цитувати:Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit / J. Zapletal, S. Vechet, J. Kohout, K. Obrtlfk // Проблемы прочности. — 2008. — № 1. — С. 40-43. — Бібліогр.: 7 назв. — англ.

Репозитарії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
id irk-123456789-48240
record_format dspace
spelling irk-123456789-482402013-08-31T13:08:40Z Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit Zapletal, J. Vechet, S. Kohout, J. Obrtlik, K. Научно-технический раздел S — N curve of austempered ductile iron was obtained in the range of lifetime including low cycle fatigue domain and high cycle fatigue domain up to 108 cycles. Ultimate tensile strength is used as a limiting value of the curve. Symmetric push-pull fatigue and tensile tests were performed at room temperature on isothermally treated nodular cast iron alloyed with copper and nickel having positive impact on mechanical, technological and fatigue properties of austempered ductile iron. Suitable functions for the fit of experimentally determined points were tested and their parameters were calculated. The best results were obtained using the Palmgren function and the function introduced by Kohout and Vechet. Since the loading frequency in high-cycle region is two orders higher than in low-cycle region, the effect of loading cycle frequency on fatigue behavior of the studied material is also studied. A possibility of discontinuity of experimental data between low-cycle and high-cycle regions is discussed. Получена кривая усталости аустенитно-отпущенного ковкого чугуна (ADI) в диапазоне долговечности, включая области малоцикловой и многоцикловой усталости до 108 циклов. В качестве предельного значения указанной кривой используется предел прочности при растяжении. Проведены испытания на усталость при симметричном растяжении-сжатии и на растяжение при комнатной температуре изотермически термообработанного чугуна с шаровидным графитом, с добавками меди и никеля, которые оказывают положительное влияние на механические, технологические и усталостные свойства ADI. Осуществлена проверка соответствующих функций для описания экспериментально определенных точек; выполнен расчет параметров указанных функций. Наилучшие результаты получены при использовании функции Пальмгрена и функции, предложенной Когутом и Вечетом. Исследовано также влияние частоты циклов нагружения на усталостное поведение рассматриваемого материала с учетом того, что частота нагружения в многоцикловой области на два порядка превышает частоту нагружения в малоцикловой области. Рассмотрена также возможность отсутствия непрерывности в экспериментальных данных на участке между малоцикловой и многоцикловой областями. 2008 Article Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit / J. Zapletal, S. Vechet, J. Kohout, K. Obrtlfk // Проблемы прочности. — 2008. — № 1. — С. 40-43. — Бібліогр.: 7 назв. — англ. 0556-171X http://dspace.nbuv.gov.ua/handle/123456789/48240 en Проблемы прочности Інститут проблем міцності ім. Г.С. Писаренко НАН України
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
collection DSpace DC
language English
topic Научно-технический раздел
Научно-технический раздел
spellingShingle Научно-технический раздел
Научно-технический раздел
Zapletal, J.
Vechet, S.
Kohout, J.
Obrtlik, K.
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
Проблемы прочности
description S — N curve of austempered ductile iron was obtained in the range of lifetime including low cycle fatigue domain and high cycle fatigue domain up to 108 cycles. Ultimate tensile strength is used as a limiting value of the curve. Symmetric push-pull fatigue and tensile tests were performed at room temperature on isothermally treated nodular cast iron alloyed with copper and nickel having positive impact on mechanical, technological and fatigue properties of austempered ductile iron. Suitable functions for the fit of experimentally determined points were tested and their parameters were calculated. The best results were obtained using the Palmgren function and the function introduced by Kohout and Vechet. Since the loading frequency in high-cycle region is two orders higher than in low-cycle region, the effect of loading cycle frequency on fatigue behavior of the studied material is also studied. A possibility of discontinuity of experimental data between low-cycle and high-cycle regions is discussed.
format Article
author Zapletal, J.
Vechet, S.
Kohout, J.
Obrtlik, K.
author_facet Zapletal, J.
Vechet, S.
Kohout, J.
Obrtlik, K.
author_sort Zapletal, J.
title Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
title_short Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
title_full Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
title_fullStr Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
title_full_unstemmed Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
title_sort fatigue lifetime of adi from ultimate tensile strength to permanent fatigue limit
publisher Інститут проблем міцності ім. Г.С. Писаренко НАН України
publishDate 2008
topic_facet Научно-технический раздел
url http://dspace.nbuv.gov.ua/handle/123456789/48240
citation_txt Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit / J. Zapletal, S. Vechet, J. Kohout, K. Obrtlfk // Проблемы прочности. — 2008. — № 1. — С. 40-43. — Бібліогр.: 7 назв. — англ.
series Проблемы прочности
work_keys_str_mv AT zapletalj fatiguelifetimeofadifromultimatetensilestrengthtopermanentfatiguelimit
AT vechets fatiguelifetimeofadifromultimatetensilestrengthtopermanentfatiguelimit
AT kohoutj fatiguelifetimeofadifromultimatetensilestrengthtopermanentfatiguelimit
AT obrtlikk fatiguelifetimeofadifromultimatetensilestrengthtopermanentfatiguelimit
first_indexed 2023-10-18T18:09:26Z
last_indexed 2023-10-18T18:09:26Z
_version_ 1796143461392449536