Deformation resistance and structure-forming processes of iron aluminides in hot rolling

We have developed simple mathematical models of mean equivalent stress dependence on temperature and strain for selected iron aluminides. Four similar melts with 16.5-19.2 wt.% of Al, 4 wt.% of Cr and with various contents of Ti and B were studied and compared. Flat specimens graded by thickness wer...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2008
Автори: Suchanek, P., Schindler, I., Kratochvil, P., Hanus, P.
Формат: Стаття
Мова:English
Опубліковано: Інститут проблем міцності ім. Г.С. Писаренко НАН України 2008
Назва видання:Проблемы прочности
Теми:
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/48463
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Цитувати:Deformation resistance and structure-forming processes of iron aluminides in hot rolling / P. Suchanek, I. Schindler, P. Kratochvil, P. Hanus // Проблемы прочности. — 2008. — № 1. — С. 44-47. — Бібліогр.: 4 назв. — англ.

Репозитарії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
id irk-123456789-48463
record_format dspace
spelling irk-123456789-484632013-08-19T23:08:22Z Deformation resistance and structure-forming processes of iron aluminides in hot rolling Suchanek, P. Schindler, I. Kratochvil, P. Hanus, P. Научно-технический раздел We have developed simple mathematical models of mean equivalent stress dependence on temperature and strain for selected iron aluminides. Four similar melts with 16.5-19.2 wt.% of Al, 4 wt.% of Cr and with various contents of Ti and B were studied and compared. Flat specimens graded by thickness were hot rolled. Deformation resistance was calculated from the roll force values obtained using a laboratory mill Tandem. Postdynamic structure-forming processes of the tested aluminides, as well as their cracking susceptibility, were investigated by metallography. The differences in the deformation behavior and formability of the tested aluminides were described. Разработаны простые математические модели зависимости среднего эквивалентного напряжения от температуры и деформации для выбранных алюминидов железа. Были изучены и сравнены четыре одинаковые плавки, содержащие 16,5...19,2 вес.% Al, и 4 вес.% Сг и различное количество титана и бора. Плоские образцы, рассортированные по толщине, подвергались горячей прокатке. Сопротивление деформированию рассчитывали по величине усилия на валки, определенной с использованием лабораторного прокатного стана Тандем. Процессы структурообразования испытанных алюминидов после динамического воздействия и их склонность к трещинообразованию исследовали с использованием металлографии. Описаны наблюдавшиеся различия в поведении испытанных алюминидов при деформировании и в способности к формоизменению. 2008 Article Deformation resistance and structure-forming processes of iron aluminides in hot rolling / P. Suchanek, I. Schindler, P. Kratochvil, P. Hanus // Проблемы прочности. — 2008. — № 1. — С. 44-47. — Бібліогр.: 4 назв. — англ. 0556-171X http://dspace.nbuv.gov.ua/handle/123456789/48463 539. 4 en Проблемы прочности Інститут проблем міцності ім. Г.С. Писаренко НАН України
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
collection DSpace DC
language English
topic Научно-технический раздел
Научно-технический раздел
spellingShingle Научно-технический раздел
Научно-технический раздел
Suchanek, P.
Schindler, I.
Kratochvil, P.
Hanus, P.
Deformation resistance and structure-forming processes of iron aluminides in hot rolling
Проблемы прочности
description We have developed simple mathematical models of mean equivalent stress dependence on temperature and strain for selected iron aluminides. Four similar melts with 16.5-19.2 wt.% of Al, 4 wt.% of Cr and with various contents of Ti and B were studied and compared. Flat specimens graded by thickness were hot rolled. Deformation resistance was calculated from the roll force values obtained using a laboratory mill Tandem. Postdynamic structure-forming processes of the tested aluminides, as well as their cracking susceptibility, were investigated by metallography. The differences in the deformation behavior and formability of the tested aluminides were described.
format Article
author Suchanek, P.
Schindler, I.
Kratochvil, P.
Hanus, P.
author_facet Suchanek, P.
Schindler, I.
Kratochvil, P.
Hanus, P.
author_sort Suchanek, P.
title Deformation resistance and structure-forming processes of iron aluminides in hot rolling
title_short Deformation resistance and structure-forming processes of iron aluminides in hot rolling
title_full Deformation resistance and structure-forming processes of iron aluminides in hot rolling
title_fullStr Deformation resistance and structure-forming processes of iron aluminides in hot rolling
title_full_unstemmed Deformation resistance and structure-forming processes of iron aluminides in hot rolling
title_sort deformation resistance and structure-forming processes of iron aluminides in hot rolling
publisher Інститут проблем міцності ім. Г.С. Писаренко НАН України
publishDate 2008
topic_facet Научно-технический раздел
url http://dspace.nbuv.gov.ua/handle/123456789/48463
citation_txt Deformation resistance and structure-forming processes of iron aluminides in hot rolling / P. Suchanek, I. Schindler, P. Kratochvil, P. Hanus // Проблемы прочности. — 2008. — № 1. — С. 44-47. — Бібліогр.: 4 назв. — англ.
series Проблемы прочности
work_keys_str_mv AT suchanekp deformationresistanceandstructureformingprocessesofironaluminidesinhotrolling
AT schindleri deformationresistanceandstructureformingprocessesofironaluminidesinhotrolling
AT kratochvilp deformationresistanceandstructureformingprocessesofironaluminidesinhotrolling
AT hanusp deformationresistanceandstructureformingprocessesofironaluminidesinhotrolling
first_indexed 2023-10-18T18:09:40Z
last_indexed 2023-10-18T18:09:40Z
_version_ 1796143472031301632