The limit load calculations for pipelines with axial complex-shaped defects
Based on the analytical model for the plastic limit state, a numerical procedure for estimating the remaining strength of a complex-shaped defect has been developed. Comparison of the calculation results obtained by the proposed procedure with the experimental data and the calculation results obtain...
Збережено в:
| Дата: | 2009 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2009
|
| Назва видання: | Проблемы прочности |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/48475 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | The limit load calculations for pipelines with axial complex-shaped defects / A.V. Bogdan, I.V. Lokhman, S.M. Ageev, I.V. Orynyak // Проблемы прочности. — 2009. — № 1. — С. 61-68. — Бібліогр.:4 назв. — англ. |
Репозиторії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | Based on the analytical model for the plastic limit state, a numerical procedure for estimating the remaining strength of a complex-shaped defect has been developed. Comparison of the calculation results obtained by the proposed procedure with the experimental data and the calculation results obtained by other methods showed its efficiency. |
|---|