Structural, mechanical, and electrochemical properties of Ceria doped Scandia stabilized Zirconia

• Дата: 2011
• Автори: Vasylyev, O.D., Smirnova, A.L., Brychevskyi, M.M., Brodnikovskyi, I.M., Firstov, S.O., Vereschak, V.G., Akimov, G.Ya., Komysa, Yu.O., Irvine, J.T.S., Savaniu, C.-D., Sadykov, V.A., Kosacki, I.
• Формат: Стаття
• Мова: English
• Опубліковано: Інститут проблем матеріалознавства ім. І.М. Францевича НАН України 2011
• Назва видання: Наноструктурное материаловедение
• Теми: Консолидированные наноструктурные материалы, трехмерные объекты
• Онлайн доступ: http://dspace.nbuv.gov.ua/handle/123456789/62754
• Назва журналу: Digital Library of Periodicals of National Academy of Sciences of Ukraine
• Цитувати: Structural, mechanical, and electrochemical properties of Ceria doped Scandia stabilized Zirconia / O.D. Vasylyev, A.L. Smirnova, M.M. Brychevskyi, I.M. Brodnikovskyi, S.O. Firstov, V.G. Vereschak, G.Ya. Akimov, Yu.O. Komysa, J.T.S. Irvine, C.-D. Savaniu, V.A. Sadykov, I. Kosacki // Наноструктурное материаловедение. — 2011. — № 1. — С. 70-80. — Бібліогр.: 12 назв. — рос.

The properties of Ceria doped Scandia Stabilized Zirconia (1Ce10ScSZ) nano-powder produced in Ukraine (Ukr, VMMP) are compared to the properties of commercial ones produced by Daiichi Kigenso Kagaku Kogyo (DKKK, Japan) and Praxair (USA). In comparison to DKKK and Praxair, the Ukr nano-powder demonstrated the smallest size of the particles ranging from 20 to 50 nm. The bending strength of the isostatically pressed samples made of Ukr powder was 100–120 MPa similar to that of Praxair. The bending strength of DKKK was lower (50–100 MPa) depending on the isostatic pressure. The biaxial strength of uniaxially pressed samples was the highest for DKKK (375 MPa) decreasing to 250 MPa for Ukr and 220 MPa for Praxair. Among three tested samples, the highest electric conductivity measured at 700 °C was found for Ukr electrolyte.