Nano- and submicrocrystalline steels processed by severe plastic deformation
The aim of this paper is to consider the features of structure evolution during severe plastic deformation (SPD) of steels and its influence on mechanical properties. The investigations have been carried out mainly on low-carbon steels as well as on austenitic stainless steels after SPD by torsion u...
Збережено в:
| Дата: | 2008 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Донецький фізико-технічний інститут ім. О.О. Галкіна НАН України
2008
|
| Назва видання: | Физика и техника высоких давлений |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/70455 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Nano- and submicrocrystalline steels processed by severe plastic deformation / S.V. Dobatkin // Физика и техника высоких давлений. — 2008. — Т. 18, № 4. — С. 36-50. — Бібліогр.: 20 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The aim of this paper is to consider the features of structure evolution during severe plastic deformation (SPD) of steels and its influence on mechanical properties. The investigations have been carried out mainly on low-carbon steels as well as on austenitic stainless steels after SPD by torsion under high pressure (HPT) and equal-channel angular pressing (ECAP). Structure formation dependences on temperature deformation conditions, strain degree, chemical composition, initial state and pressure are considered. The role of phase transformations for additional grain refinement, namely, martensitic transformation, precipitation of carbide particles during SPD and heating is underlined. |
|---|