Average proton beam current increasing at the MMFL injector
The most essential results on the MMF Linac Injector beam current increase are given. The problem is solving in two ways: 1) reconstructing of the optics at the input part of the accelerating tube; 2) pulse repetition rate magnification. Possibility of the pulse current increase with the emittance...
Збережено в:
| Дата: | 2004 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2004
|
| Назва видання: | Вопросы атомной науки и техники |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/78473 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Average proton beam current increasing at the MMFL injector / V.I. Derbilov, S.K. Esin, E.S. Nikulin, O.T. Frolov, V.P. Yakushev // Вопросы атомной науки и техники. — 2004. — № 1. — С. 13-15. — Бібліогр.: 4 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The most essential results on the MMF Linac Injector beam current increase are given. The problem is solving in
two ways: 1) reconstructing of the optics at the input part of the accelerating tube; 2) pulse repetition rate magnification. Possibility of the pulse current increase with the emittance growth being limited is studied. The emittance and
phase density of the beam at the exit of the accelerating tube are presented. The experimental data are compared
with the numerical calculations. Preliminary results on the injector transition to the 100 Hz repetition rate are given. |
|---|