Influence of hydrogen implantation and oxidation on air on the structure and mechanical properties of nickel based coating PG-19-01
Influence of oxidation on air and hydrogen implantation on the structure and mechanical properties of nickel based coating PG-19N-01 deposited on iron and stainless steel C0.12Cr18Ni10Ti substrate and also of iron with plasma treatment of surface were studied. It is shown, that implantation by proto...
Збережено в:
Дата: | 2008 |
---|---|
Автори: | , , , , , |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
Науковий фізико-технологічний центр МОН та НАН України
2008
|
Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/7880 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
Цитувати: | Influence of hydrogen implantation and oxidation on air on the structure and mechanical properties of nickel based coating PG-19-01 / K.K. Kadyrzhanov, S.B. Kislitsin, F.F. Komarov, A.D. Pogrebnjak, V.S. Rusakov, Y.Zh. Tuleushev // Физическая инженерия поверхности. — 2008. — Т. 6, № 3-4. — С. 217-220. — Бібліогр.: 4 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of UkraineРезюме: | Influence of oxidation on air and hydrogen implantation on the structure and mechanical properties of nickel based coating PG-19N-01 deposited on iron and stainless steel C0.12Cr18Ni10Ti substrate and also of iron with plasma treatment of surface were studied. It is shown, that implantation by protons with energy from 0.6 to 1.6 MeV up to doze 3•10^18 proton/cm^2 lead to insignificant changes of structure and strength properties of PG-19N-01 coating. In the samples oxidized on air at temperatures 500 °С, 700 °С and 900 °С during three hours increase in microhardness and strength of the material at mechanical tests on static bend is observed. |
---|