Реконструкція 3D моделі об'єкта з використанням монокулярної RGB камери
Every year the edge between the real and digital worlds is becoming more and more blurred. Augmented and virtual reality rapid development creates new opportunities for more productive work and entertainment, revolution in 3D printing technologies begets boost in multiple DIY communities appearance...
Збережено в:
Дата: | 2017 |
---|---|
Автори: | , , |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
The National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"
2017
|
Теми: | |
Онлайн доступ: | http://journal.iasa.kpi.ua/article/view/119388 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Назва журналу: | System research and information technologies |
Репозитарії
System research and information technologiesРезюме: | Every year the edge between the real and digital worlds is becoming more and more blurred. Augmented and virtual reality rapid development creates new opportunities for more productive work and entertainment, revolution in 3D printing technologies begets boost in multiple DIY communities appearance and sharing economy growth. All these factors require new technologies that allow making 3D models from real world objects, but most of these solutions are either very expensive or require complex technical knowledge that most ordinary people do not have. This paper provides a review and comparison of modern methods for 3D models of physical objects real time reconstruction that can be used in present-day mobile solutions. |
---|