Автоматизація етапів проектування компонувальної схеми виробничої лінії технологічного парку
As a result of the analysis of the stages for the development of the layout diagram of technological units in the production line of the technological park, depending on the specifics of the enterprise, a number of input information and design procedures for automated design were determined in stage...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | rus |
| Опубліковано: |
The National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"
2018
|
| Теми: | |
| Онлайн доступ: | http://journal.iasa.kpi.ua/article/view/150069 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | System research and information technologies |
Репозитарії
System research and information technologies| Резюме: | As a result of the analysis of the stages for the development of the layout diagram of technological units in the production line of the technological park, depending on the specifics of the enterprise, a number of input information and design procedures for automated design were determined in stages. In order to choose the best layout variants of production lines for the technological park, an algorithm was proposed with allowable criteria for work zone restrictions and traffic safety of the technical units of the production line. A software was developed to select the layout diagram FMS from the technology park. |
|---|