Buchumschlag

Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling

Modeling of the rotor thermal state of a synchronous turbogenerator of 550 MW with direct cooling of the winding by hydrogen is performed. The temperature field of the rotor is investigated by finite element method in a three-dimensional formulation. Mathematical modeling of the task is implemented...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
1. Verfasser:	Овсянникова, Е. А.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2017
Schlagworte:	turbogenerator rotor winding thermal state finite element method УДК 621.1.016.7
Online Zugang:	https://journals.uran.ua/jme/article/view/111550
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
von: Овсянникова, Е. А.
Veröffentlicht: (2017)

Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)

Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)

TURBOGENERATOR ROTOR HEATING IN PRESENCE OF ROTOR WINDING DEFECTS AND EXCITATION CURRENT FORCING
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2020)

Development thermal state of the rotor of the turbogenerator with direct hydrogen cooling
von: E. A. Ovsjannikova
Veröffentlicht: (2017)

Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: K. A. Kobzar, et al.
Veröffentlicht: (2015)

Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
von: Kuchynskyi, K. A., et al.
Veröffentlicht: (2023)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
von: Бахмутская, Ю. О., et al.
Veröffentlicht: (2017)

К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
von: Бахмутская, Ю. О., et al.
Veröffentlicht: (2017)

CALCULATION OF THE THERMAL FIELD OF A POLYFUNCTIONAL ELECTROMECHANICAL TRANSDUCER WITH A HOLLOW PERFORATED ROTOR
von: Zablodskii, N. N., et al.
Veröffentlicht: (2013)

AUTOMATED FORMATION OF CALCULATION MODELS OF TURBOGENERATORS FOR SOFTWARE ENVIRONMENT FEMM
von: Milykh, V. I., et al.
Veröffentlicht: (2015)

ELECTROMAGNETIC VIBRATION DISTURBING FORCES AT THE ECCENTRICITY OF ROTOR OF TURBOGENERATOR
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2016)

THE INFLUENCE OF AERODYNAMIC CHARACTERISTICS OF A BLADE PROFILE ON THE ENERGY CHARACTERISTICS OF A WINDOW ROTOR
von: Holovko, V., et al.
Veröffentlicht: (2019)

ANALYSIS OF THE VARIABLE COMPONENT OF MAGNETIC FIELD ON THE ROTATING ROTOR SURFACE OF A TURBOGENERATOR.
von: Milykh, V. I., et al.
Veröffentlicht: (2013)

IMPROVED MATHEMATICAL MODEL OF THE ORIENTATION SYSTEM OF THE ROTOR OF A WIND INSTALLATION WITH A VANE PLANE
von: Golovko, V., et al.
Veröffentlicht: (2023)

ADVANCED MATHEMATICAL MODEL OF THE CENTRIFUGAL REGULATOR OF THE WIND ROTOR WITH FLUGE CONTROL
von: Golovko, V., et al.
Veröffentlicht: (2021)

ADVANCED MATHEMATICAL MODEL OF THE CENTRIFUGAL REGULATOR OF THE WIND ROTOR WITH ANTI-FLUGE CONTROL
von: Golovko, V., et al.
Veröffentlicht: (2022)

NUMERICAL FIELD ESTIMATION OF TURBOGENERATOR STATOR WINDING SHORTENING EFFICIENCY
von: Milykh, V. I., et al.
Veröffentlicht: (2014)

STABILITY OF THE WIND TURBINE ROTOR REGULATION SYSTEM TAKING INTO ACCOUNT IMPROVED MATHEMATICAL MODELS OF THE CENTRAL REGULATOR
von: Golovko, V., et al.
Veröffentlicht: (2022)

STABILITY OF THE WIND TURBINE ROTOR REGULATION SYSTEM TAKING INTO ACCOUNT IMPROVED MATHEMATICAL MODELS OF THE CENTRAL REGULATOR
von: Golovko, V., et al.
Veröffentlicht: (2022)

MATHEMATICAL MODEL OF THE SYSTEM OF ORIENTATION OF THE ROTOR OF A WIND INSTALLATION AT THE ACCOUNT OF OWN ROTOR OWN SAWING
von: Holovko, V., et al.
Veröffentlicht: (2020)

Analysis of the thermal state of the electromagnetic mill inductor with oil cooling in stationary operation modes
von: Milykh, V. I., et al.
Veröffentlicht: (2023)

Stress-deformable state near the earthquake focus
von: Lubkov, M.V.
Veröffentlicht: (2025)

3D model-based evaluation of the vibration characteristics of a rotor with a transverse crack on rigid supports
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)

3D model-based evaluation of the vibration characteristics of a rotor with a transverse crack on rigid supports
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
von: Ostashevskiy, N. A., et al.
Veröffentlicht: (2013)

Axial flux machine with non-slotted torus-ns rotor type. Design and investigate for electric traction
von: Larbi, B., et al.
Veröffentlicht: (2023)

Review of some schemes of cooling of turbogenerators and control of humidity of cooling hydrogen
von: A. S. Levytskyi, et al.
Veröffentlicht: (2014)

Internal capacitive compensation of the reactive power of the screw electromechanical converter
von: Zablodskiy, M. M., et al.
Veröffentlicht: (2024)

DEVELOPMENT OF THE STAND AND METHODS OF RESEARCH OF CENTRIFUGAL REGULATORS FOR WINDOWS
von: Holovko, V., et al.
Veröffentlicht: (2017)

Use of Refined Finite Element Models for Solving the Contact Thermoalasticity Problem of Gas Turbine Rotors
von: Morgun, Sergey A., et al.
Veröffentlicht: (2018)

Use of Refined Finite Element Models for Solving the Contact Thermoalasticity Problem of Gas Turbine Rotors
von: Morgun, Sergey A., et al.
Veröffentlicht: (2018)

Comprehensive research of stress–strain state of full – scale spiral case of francis turbine РО400–B–450 as not concreted
von: Ровний, К. М., et al.
Veröffentlicht: (2015)

Comprehensive research of stress–strain state of full – scale spiral case of francis turbine РО400–B–450 as not concreted
von: Ровний, К. М., et al.
Veröffentlicht: (2015)

COMPARATIVE ANALYSIS OF ELECTRICAL AND THERMAL CONTROL OF THE LINING STATE OF INDUCTION APPARATUS OF COPPER WIRE MANUFACTURE
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2018)

The analysis of temperature field of rotor of turbogenerator capacity 300 mw at asymmetry of cooling of grooving zone
von: K. A. Kuchinskij
Veröffentlicht: (2013)

Features load capacity assessment of power transformers in the wind power plants
von: Kazanskiy, S., et al.
Veröffentlicht: (2017)

Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
von: Чугай, А. М.
Veröffentlicht: (2014)