Development of the 500 kW and 1 MW ORC turbine flow parts
There paper presents two types of developed ORC turbines. The silica oil (MDM) is used as the working media. Proposed turbines are developed for electric power in 500 kW and 1 MW. For the designing of that turbines there were only one geometric constraint: the minimum height of the blade – 20 mm. Th...
Збережено в:
Видавець: | Journal of Mechanical Engineering |
---|---|
Дата: | 2017 |
Автори: | , , , |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
Journal of Mechanical Engineering
2017
|
Теми: | |
Онлайн доступ: | https://journals.uran.ua/jme/article/view/113786 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Репозиторії
Journal of Mechanical EngineeringРезюме: | There paper presents two types of developed ORC turbines. The silica oil (MDM) is used as the working media. Proposed turbines are developed for electric power in 500 kW and 1 MW. For the designing of that turbines there were only one geometric constraint: the minimum height of the blade – 20 mm. The final 3D calculations of all turbine stages are provided with accounting the real properties of working media. Gasdynamic efficiency of the developed turbine flow parts is adequate for the such type of power machines. |
---|