Numerical analysis of stress-strain state of vertical cylindrical oil tanks with dents
The destruction of vertical cylindrical tanks results in both human and economic losses. Despite constant improvement of the manufacturing technology of cylindrical tanks, a complete analysis of the influence of various dents on stress-strain states was not performed. Dents are the most dangerous, u...
Gespeichert in:
| Datum: | 2018 |
|---|---|
| Hauptverfasser: | Buganova, S. N., Avramov, K. V. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2018
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/129059 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Journal of Mechanical Engineering |
Institution
Journal of Mechanical EngineeringÄhnliche Einträge
Numerical analysis of stress-strain state of vertical cylindrical oil tanks with dents
von: Buganova, S. N., et al.
Veröffentlicht: (2018)
von: Buganova, S. N., et al.
Veröffentlicht: (2018)
Numerical Analysis of Stress-Strain State of Vertical Cylindrical Oil Tanks with Dents
von: S. N. Buganova, et al.
Veröffentlicht: (2018)
von: S. N. Buganova, et al.
Veröffentlicht: (2018)
Numerical Analysis of Stress-Strain State of Vertical Cylindrical Oil Tanks with Dents
von: Buganova, S.N., et al.
Veröffentlicht: (2018)
von: Buganova, S.N., et al.
Veröffentlicht: (2018)
Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)
Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)
Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 2. Analysis Results
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019)
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019)
Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 2. Analysis Results
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019)
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019)
Analysis of stress-strain state of Caucasus region (Azerbaijan) on the basis of maximum horizontal stress vectors and "World Stress Map" application technique
von: Babayev, G.P., et al.
Veröffentlicht: (2017)
von: Babayev, G.P., et al.
Veröffentlicht: (2017)
Experimental and numerical analysis of deflected mode of cylindrical tanks with pinches
von: Айнабеков, А. И., et al.
Veröffentlicht: (2015)
von: Айнабеков, А. И., et al.
Veröffentlicht: (2015)
Experimental and numerical analysis of deflected mode of cylindrical tanks with pinches
von: Айнабеков, А. И., et al.
Veröffentlicht: (2015)
von: Айнабеков, А. И., et al.
Veröffentlicht: (2015)
Experimental study of dynamic deformation structuredmedium under the impulse loading
von: Mykulyak, S. V., et al.
Veröffentlicht: (2014)
von: Mykulyak, S. V., et al.
Veröffentlicht: (2014)
Deformations in the Upper Cretaceous — Neogene sediments of the South-Western Crimea on the base of new tectonophysical data
von: Murovskaya, A., et al.
Veröffentlicht: (2014)
von: Murovskaya, A., et al.
Veröffentlicht: (2014)
Stress Concentration in Vertical Tank Weld Seams
von: B. V. Uspenskiy, et al.
Veröffentlicht: (2018)
von: B. V. Uspenskiy, et al.
Veröffentlicht: (2018)
Stress Concentration in Vertical Tank Weld Seams
von: Uspenskiy, B.V., et al.
Veröffentlicht: (2018)
von: Uspenskiy, B.V., et al.
Veröffentlicht: (2018)
Methods to Reduce Material Intensity of Tail Sections of Launch Vehicles
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)
Methods to Reduce Material Intensity of Tail Sections of Launch Vehicles
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)
Analysis of Crack Growth in the Wall of an Electrolyser Compartment
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)
Analysis of Crack Growth in the Wall of an Electrolyser Compartment
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)
Comprehensive research of stress–strain state of full – scale spiral case of francis turbine РО400–B–450 as not concreted
von: Ровний, К. М., et al.
Veröffentlicht: (2015)
von: Ровний, К. М., et al.
Veröffentlicht: (2015)
Comprehensive research of stress–strain state of full – scale spiral case of francis turbine РО400–B–450 as not concreted
von: Ровний, К. М., et al.
Veröffentlicht: (2015)
von: Ровний, К. М., et al.
Veröffentlicht: (2015)
Parameters of the fault planes for the Crimean Black Sea region by averaged mechanism of close earthquakes
von: Shumlyanskaya, L. A., et al.
Veröffentlicht: (2016)
von: Shumlyanskaya, L. A., et al.
Veröffentlicht: (2016)
Stress-deformable state near the earthquake focus
von: Lubkov, M.V.
Veröffentlicht: (2025)
von: Lubkov, M.V.
Veröffentlicht: (2025)
Mathematical modelling of the elastic behavior of structured geophysical media
von: Olali, N. V., et al.
Veröffentlicht: (2017)
von: Olali, N. V., et al.
Veröffentlicht: (2017)
Substantiation of the leak to fracture criterion as applied to vertical cylindrical oil storage tanks
von: V. V. Knysh, et al.
Veröffentlicht: (2012)
von: V. V. Knysh, et al.
Veröffentlicht: (2012)
On the equilibrium of non-thin cylindrical shells with a dent
von: Ya. M. Hryhorenko, et al.
Veröffentlicht: (2020)
von: Ya. M. Hryhorenko, et al.
Veröffentlicht: (2020)
Thermal and Stress-Strain State of Cast Bodies of Control Valves of 200 MW Power Units
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)
Thermal and Stress-Strain State of Cast Bodies of Control Valves of 200 MW Power Units
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)
ГАЗОНОСНІСТЬ ВІДПРАЦЬОВАНОГО ПРОСТОРУ ДІЮЧИХ ШАХТ ДОНБАСУ
von: Vergelska, N.
Veröffentlicht: (2012)
von: Vergelska, N.
Veröffentlicht: (2012)
Contact deformation of the pipeline sealing unit
von: Kostikov, Andrii O., et al.
Veröffentlicht: (2021)
von: Kostikov, Andrii O., et al.
Veröffentlicht: (2021)
Contact deformation of the pipeline sealing unit
von: Kostikov, Andrii O., et al.
Veröffentlicht: (2021)
von: Kostikov, Andrii O., et al.
Veröffentlicht: (2021)
Express-analysis when modeling the stress-strain state of stamp rigging elements
von: Демина, Н. А.
Veröffentlicht: (2015)
von: Демина, Н. А.
Veröffentlicht: (2015)
Express-analysis when modeling the stress-strain state of stamp rigging elements
von: Демина, Н. А.
Veröffentlicht: (2015)
von: Демина, Н. А.
Veröffentlicht: (2015)
Electromagnetic processes in an inductor system with a single thin round turn with a cut above a thin metal sheet
von: Gnatov, A. V.
Veröffentlicht: (2012)
von: Gnatov, A. V.
Veröffentlicht: (2012)
Solution of contact problem for plane weakened of variable width slot in inhomogeneous stress field
von: Гасанов, Ш. Г.
Veröffentlicht: (2017)
von: Гасанов, Ш. Г.
Veröffentlicht: (2017)
Solution of contact problem for plane weakened of variable width slot in inhomogeneous stress field
von: Гасанов, Ш. Г.
Veröffentlicht: (2017)
von: Гасанов, Ш. Г.
Veröffentlicht: (2017)
Influence of internal stresses on wave processes and ultrasound absorption in wel-ding.
von: Tokalin, O. A.
Veröffentlicht: (2019)
von: Tokalin, O. A.
Veröffentlicht: (2019)
Improving geometry and reliability multisupporting long tail compounds steam turbine blades
von: Бояршинов, А. Ю.
Veröffentlicht: (2014)
von: Бояршинов, А. Ю.
Veröffentlicht: (2014)
Improving geometry and reliability multisupporting long tail compounds steam turbine blades
von: Бояршинов, А. Ю.
Veröffentlicht: (2014)
von: Бояршинов, А. Ю.
Veröffentlicht: (2014)
Prepuberal stress and obesity: effects on serum corticosterone, prolactin, testosterone and precancerous prostate lesions in adult rats
von: Herrera-Covarrubias, D., et al.
Veröffentlicht: (2023)
von: Herrera-Covarrubias, D., et al.
Veröffentlicht: (2023)
ОПТИМАЛЬНЕ РОЗТАШУВАННЯ ДЕГАЗАЦІЙНИХ СВЕРДЛОВИН У МЕЖАХ ГІРНИЧОГО ВІДВОДУ ВУГІЛЬНИХ ШАХТ ЗА ДАНИМИ СТАГД
von: Dubosarskiy, V.
Veröffentlicht: (2015)
von: Dubosarskiy, V.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Numerical analysis of stress-strain state of vertical cylindrical oil tanks with dents
von: Buganova, S. N., et al.
Veröffentlicht: (2018) -
Numerical Analysis of Stress-Strain State of Vertical Cylindrical Oil Tanks with Dents
von: S. N. Buganova, et al.
Veröffentlicht: (2018) -
Numerical Analysis of Stress-Strain State of Vertical Cylindrical Oil Tanks with Dents
von: Buganova, S.N., et al.
Veröffentlicht: (2018) -
Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019) -
Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)