Buchumschlag

Influence of Thermal and Mechanical Factors on the Stressed State of Large Components of Hydrogenerator-Motors

The work presented contains a detailed analysis of the existing ultimate power air-cooled hydrogenerator-motor design. It is shown that the umbrella-type hydrogenerator crosspiece perceives dynamic loads caused by forces acting in three planes. At the same time, to take them into account by analytic...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	Tretyak, Aleksey V., Shut, Aleksandr Yu., Gakal, Pavel G.
Format:	Artikel
Sprache:	Englisch Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2018
Schlagworte:	hydrogenerator mechanical stresses thermal process metal defects UDC 621.313.322-82
Online Zugang:	https://journals.uran.ua/jme/article/view/144173
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Influence of Thermal and Mechanical Factors on the Stressed State of Large Components of Hydrogenerator-Motors
von: Tretyak, Aleksey V., et al.
Veröffentlicht: (2018)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

Mathematical simulation of thermal condition of a brush contact device in a three-dimensional setting
von: Tretiak, O. V.
Veröffentlicht: (2018)

Mathematical simulation of thermal condition of a brush contact device in a three-dimensional setting
von: Tretiak, O. V.
Veröffentlicht: (2018)

Influence of Thermal and Mechanical Factors on the Stressed State of Large Components of Hydrogenerator-Motors
von: A. V. Tretyak, et al.
Veröffentlicht: (2018)

Influence of Thermal and Mechanical Factors on the Stressed State of Large Components of Hydrogenerator-Motors
von: Tretyak, A.V., et al.
Veröffentlicht: (2018)

ELECTRIC GENERATOR IN THE RECUPERATION SYSTEM OF THE ENERGY FROM MECHANICAL OSCILLATIONS IN VEHICLES
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2018)

ELECTROMAGNETIC VIBRATION DISTURBING FORCES AT THE ECCENTRICITY OF ROTOR OF TURBOGENERATOR
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2016)

TURBOGENERATOR ROTOR HEATING IN PRESENCE OF ROTOR WINDING DEFECTS AND EXCITATION CURRENT FORCING
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2020)

ANALYSIS OF ELECTROMAGNETIC VIBRATION FORCES IN THE ELEMENTS OF THE TURBOGENERATOR STATOR FASTENING TO THE CASE IN NON-NOMINAL OPERATION MODES
von: Shevchenko, V. V., et al.
Veröffentlicht: (2018)

Determination of the maximum mechanical stresses in the insulating material around a defect with a high dielectric permittivity in an electrostatic field
von: Palchykov, O. О.
Veröffentlicht: (2024)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: A. N. Vakulenko, et al.
Veröffentlicht: (2015)

Increasing the efficiency of cryogenic automobile power systems using thermoelectric generators
von: Traum, M. J., et al.
Veröffentlicht: (2016)

Increasing the efficiency of cryogenic automobile power systems using thermoelectric generators
von: Traum, M. J., et al.
Veröffentlicht: (2016)

Mixed topic-entity ontology for enhanced topic vector-spaced model
von: Shabinskiy, A.S.
Veröffentlicht: (2025)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

Mathematical modeling of electromechanical processes in a brushless DC motor
von: Tkachuk, V. I., et al.
Veröffentlicht: (2014)

The Choice of a Rational Technology for Manufacturing the Hydrogenerators-Motors Rotor Rim
von: P. M. Makarov
Veröffentlicht: (2023)

The Choice of a Rational Technology for Manufacturing the Hydrogenerators-Motors Rotor Rim
von: Макаров, П. М.
Veröffentlicht: (2024)

The Choice of a Rational Technology for Manufacturing the Hydrogenerators-Motors Rotor Rim
von: Макаров, П. М.
Veröffentlicht: (2024)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
von: Ostashevskiy, N. A., et al.
Veröffentlicht: (2013)

MECHANICAL CHARACTERISTICS OF THREE-PHASE INDUCTION MOTORS WITH SINGLE-PHASE POWER SUPPLY
von: Malyar, V. S., et al.
Veröffentlicht: (2016)

Parameters of the fault planes for the Crimean Black Sea region by averaged mechanism of close earthquakes
von: Shumlyanskaya, L. A., et al.
Veröffentlicht: (2016)

A MATHEMATICAL MODEL OF THERMAL POWER PLANTS SMOKE EXHAUSTERS INDUCTION MOTORS SYSTEM OPERATION MODES
von: Vasyliv, K. M.
Veröffentlicht: (2017)

ANALYSIS OF THE SPECIAL FEATURES OF THE THERMAL PROCESS IN AN INDUCTION GENERATOR AT HIGH SATURATION OF THE MAGNETIC SYSTEM
von: Chenchevoi, V., et al.
Veröffentlicht: (2017)

Modulation instability in two component Bose-Einstein condensate with relative component motion
von: Ivashin, A.P., et al.
Veröffentlicht: (2019)

К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
von: Бахмутская, Ю. О., et al.
Veröffentlicht: (2017)

К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
von: Бахмутская, Ю. О., et al.
Veröffentlicht: (2017)

Extracting structure from text documents based on machine learning
von: Kudim, K.A., et al.
Veröffentlicht: (2023)

Thermography of photovoltaic modules of solar powerstations
von: Buslova, N., et al.
Veröffentlicht: (2017)

Features of the ultrasonic welding of optical mikroprismatic elements wih a dosing of energy
von: Britsky, A. I., et al.
Veröffentlicht: (2016)

Hydrogen-sorption properties, thermal stability and kinetics of hydrogen desorption from the MgH2 phase of the mechanical alloy of Mg with Si, Ti, Fe
von: Ershova, O., et al.
Veröffentlicht: (2018)

Analysis of stress-strain state of Caucasus region (Azerbaijan) on the basis of maximum horizontal stress vectors and "World Stress Map" application technique
von: Babayev, G.P., et al.
Veröffentlicht: (2017)

DEMAND FORECASTING FOR DC MACHINES WITH APPLICATION OF FORMALIZED GROWTH-CURVE-BASED MODELS
von: Dubinina, O. N., et al.
Veröffentlicht: (2013)

Studies of the processes of production of the optical elements from the acoustooptical single crystals
von: Проц, Лариса Анатоліївна
Veröffentlicht: (2014)

Studies of the processes of production of the optical elements from the acoustooptical single crystals
von: Проц, Лариса Анатоліївна
Veröffentlicht: (2014)

A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)

PREMATURE FAILURE OF MEDIUM-POWER TWO-POLE INDUCTION MOTOR WINDINGS
von: Lushchik, V. D., et al.
Veröffentlicht: (2013)

ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)