Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
The applied sprayed coatings are absolutely new materials, which differ from the initial components by their formation history, bond nature, etc. In general mechanical engineering standards, there are no recommendations on selection of grinding modes of sprayed ceramic coatings. Therefore, at the de...
Збережено в:
Видавець: | Journal of Mechanical Engineering |
---|---|
Дата: | 2014 |
Автори: | Лебедев, Владимир, Чумаченко, Татьяна |
Формат: | Стаття |
Мова: | Russian |
Опубліковано: |
Journal of Mechanical Engineering
2014
|
Теми: | |
Онлайн доступ: | https://journals.uran.ua/jme/article/view/19913 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Репозиторії
Journal of Mechanical EngineeringСхожі ресурси
-
Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
за авторством: Лебедев, Владимир, та інші
Опубліковано: (2014) -
Application of pulse technologies in the welding of structural steels
за авторством: Жерносеков, Анатолий Максимович, та інші
Опубліковано: (2014) -
Application of pulse technologies in the welding of structural steels
за авторством: Жерносеков, Анатолий Максимович, та інші
Опубліковано: (2014) -
Structural estimation of crack resistance of welded joints of high strength steels
за авторством: Бердникова, Елена Николаевна
Опубліковано: (2014) -
Structural estimation of crack resistance of welded joints of high strength steels
за авторством: Бердникова, Елена Николаевна
Опубліковано: (2014)