Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
The applied sprayed coatings are absolutely new materials, which differ from the initial components by their formation history, bond nature, etc. In general mechanical engineering standards, there are no recommendations on selection of grinding modes of sprayed ceramic coatings. Therefore, at the de...
Збережено в:
Видавець: | Journal of Mechanical Engineering |
---|---|
Дата: | 2014 |
Автори: | , |
Формат: | Стаття |
Мова: | Russian |
Опубліковано: |
Journal of Mechanical Engineering
2014
|
Теми: | |
Онлайн доступ: | https://journals.uran.ua/jme/article/view/19913 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Репозиторії
Journal of Mechanical EngineeringБудьте першим, хто залишить коментар!