Buchumschlag

Application of pulse technologies in the welding of structural steels

The results of studies of technological capabilities of the process of pulse-arc welding of structural steels, including the use of flux-cored wires, are given in the paper. The raised level of metal losses on waste and sputter leads not only to the welding wire over-expenditure, but also to the wel...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	Жерносеков, Анатолий Максимович, Сидорец, Владимир Николаевич, Приходько, Виталий Викторович
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2014
Schlagworte:	welding arc sputter steel pulse control УДК 621.791
Online Zugang:	https://journals.uran.ua/jme/article/view/19918
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Application of pulse technologies in the welding of structural steels
von: Жерносеков, Анатолий Максимович, et al.
Veröffentlicht: (2014)

Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)

Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)

FEATURES OF ELECTRODE MELTING IN ARC WELDING OF STEELS
von: Sydorets, V. N., et al.
Veröffentlicht: (2013)

Hygienic characteristics of welding methods and welding materials
von: Levchenko, Oleg, et al.
Veröffentlicht: (2025)

Application of thermostable steel with a 9% chrome at the reconstruction of thermal power stations in Ukraine
von: Tsaruk A.K., et al.
Veröffentlicht: (2005)

CONTROL OF VALVE ELECTRIC DRIVE COORDINATES OF AUTOMATED WELDING EQUIPMENT FEED MECHANISMS
von: Lebedev, V. A., et al.
Veröffentlicht: (2020)

Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
von: Лебедев, Владимир, et al.
Veröffentlicht: (2014)

Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
von: Лебедев, Владимир, et al.
Veröffentlicht: (2014)

Hygienic assessment of magnetic fields in different methods of arc welding
von: Levchenko, Oleg H., et al.
Veröffentlicht: (2024)

On the solution of the problem of synthesis of the control system for the process of dosed feed of electrode wire for arc welding equipment
von: Lebedev, V.A.
Veröffentlicht: (2021)

Fetures of increase of productivity of welding an consumable electrode in gas shielded at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2014)

Fetures of increase of productivity of welding an consumable electrode in gas shielded at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2014)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)

Influence of technological parameters of the welding process on aerosol release
von: Levchenko, Oleg, et al.
Veröffentlicht: (2026)

APPROXIMATE CALCULATION OF ACTIVE RESISTANCE AND TEMPERATURE OF THE PULSE ELECTRIC ARC CHANNEL IN A HIGH-CURRENT DISCHARGE CIRCUIT OF A POWERFUL HIGH-VOLTAGE CAPACITOR ENERGY STORAGE
von: Baranov, M. I., et al.
Veröffentlicht: (2017)

USING A VIRTUAL DEVICE ULTRASONIC FLAW DETECTOR TO INSPECT WELDS
von: Bohachev, Ihor, et al.
Veröffentlicht: (2024)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2012)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2012)

RESEARCH INTO METHODS OF PIPE END DEMAGNETIZATION UNDER MAIN PIPELINE REPAIR
von: Dobrodeyev, P. N.
Veröffentlicht: (2014)

WORKING FEATURES OF POWER SOURCE SYSTEMS – A MULTIPLE CURRENT PULSE GENERATOR
von: Argun, Schasyana V.
Veröffentlicht: (2013)

MODELING PARAMETERS OF ARC OF ELECTRIC ARC FURNACE
von: Khrestin, R. N.
Veröffentlicht: (2015)

Application of pulse technologies in the welding of structural steels
von: A. M. Zhernosekov, et al.
Veröffentlicht: (2013)

ON THE APPLICABILITY OF THE PHASE SCANNING METHOD IN ANTENNA ARRAYS OF CHIRP PULSE RADARS
von: Galushko, V. G., et al.
Veröffentlicht: (2019)

Increasing of the efficiency of fuel-power resources using in main process of black metal production
von: Symborskiy A.I.
Veröffentlicht: (2007)

Surface microhardness of stainless steel which are modified by ionic implantation
von: Гончаров, Виталий Викторович
Veröffentlicht: (2014)

Surface microhardness of stainless steel which are modified by ionic implantation
von: Гончаров, Виталий Викторович
Veröffentlicht: (2014)

Energy efficiency of export of Ukrainian iron and steel production for 1997-2000 years
von: Danilov L.L., et al.
Veröffentlicht: (2003)

Використання віртуального ультразвукового дефектоскопу для контролю зварних швів
von: Bohachev, Ihor, et al.
Veröffentlicht: (2024)

Features of the energy distribution in ultrasonic welding for microprism optical elements
von: Tоkalin, O. A.
Veröffentlicht: (2015)

FORMING CAPABILITIES OF A PULSE MAGNETIC FIELD GENERATOR
von: Petkov, A. A.
Veröffentlicht: (2015)

PERFORMANCE ANALYSIS OF USING TAPERED WINDOWS FOR SIDELOBE REDUCTION IN CHIRP-PULSE COMPRESSION
von: Galushko, V. G.
Veröffentlicht: (2019)

The results of an investigation into the application of the micro-stepping mode when controlling a stepper motor
von: Косяк, І. В., et al.
Veröffentlicht: (2022)

Regulation characteristics of a step-down pulse regulator in continuous and discontinuous conduction mode
von: Romashko, V. Y., et al.
Veröffentlicht: (2025)

Experimental Study of the Effects of a Constant and Variable Electric Fields on the Strength Properties of the Blade Steel Surface Layer
von: Nechaev, A. V.
Veröffentlicht: (2019)

Experimental Study of the Effects of a Constant and Variable Electric Fields on the Strength Properties of the Blade Steel Surface Layer
von: Nechaev, A. V.
Veröffentlicht: (2019)

APPLICATION OF SWARM INTELLIGENCE ALGORITHMS FOR SOLVING THE PROBLEM OF OPTIMIZING THE WELDED BEAM STRUCTURE
von: Lytovchenko, Mykyta, et al.
Veröffentlicht: (2024)

AN ANTHOLOGY OF OUTSTANDING ACHIEVEMENTS IN SCIENCE AND TECHNOLOGY. PART 17: INVENTIONS IN MATERIAL WELDING
von: Baranov, M. I.
Veröffentlicht: (2013)

Fields of application of magnetic-pulse welding (Review)
von: M. A. Poleshchuk, et al.
Veröffentlicht: (2012)