Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
The wear of the friction lining and break drum of a vehicle is uneven. It is, therefore, advisable to reduce wear where it matters most. Knowing the optimal microgeometry of the friction pair surface, this problem can be solved by design-technological methods at the design and manufacturing stages....
Gespeichert in:
| Datum: | 2020 |
|---|---|
| 1. Verfasser: | Velizade, Evren S. |
| Format: | Artikel |
| Sprache: | Englisch Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2020
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/214522 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Journal of Mechanical Engineering |
Institution
Journal of Mechanical EngineeringÄhnliche Einträge
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
von: Velizade, Evren S.
Veröffentlicht: (2020)
von: Velizade, Evren S.
Veröffentlicht: (2020)
Minimization of fracture parameters for friction pair hub
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015)
Minimization of fracture parameters for friction pair hub
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015)
Optimum displacement function of external contour points of contact pair hub taking into account the thermal stresses and roughness inner contour
von: Ахундова, Парвана Эльман гызы
Veröffentlicht: (2014)
von: Ахундова, Парвана Эльман гызы
Veröffentlicht: (2014)
Optimum displacement function of external contour points of contact pair hub taking into account the thermal stresses and roughness inner contour
von: Ахундова, Парвана Эльман гызы
Veröffentlicht: (2014)
von: Ахундова, Парвана Эльман гызы
Veröffentlicht: (2014)
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
von: E. S. Velizade
Veröffentlicht: (2020)
von: E. S. Velizade
Veröffentlicht: (2020)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
von: Askerov, Sahib A.
Veröffentlicht: (2025)
von: Askerov, Sahib A.
Veröffentlicht: (2025)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
von: Askerov, Sahib A.
Veröffentlicht: (2025)
von: Askerov, Sahib A.
Veröffentlicht: (2025)
Nonlinear deformation of a two-layered planar curvilinear system
von: Ободан, Н. И., et al.
Veröffentlicht: (2017)
von: Ободан, Н. И., et al.
Veröffentlicht: (2017)
Nonlinear deformation of a two-layered planar curvilinear system
von: Ободан, Н. И., et al.
Veröffentlicht: (2017)
von: Ободан, Н. И., et al.
Veröffentlicht: (2017)
SYNTHESIS OF A TWO-MASS ELECTRIC DRIVE WITH AN ASTATIC SYSTEM OF SUBORDINATE REGULATION AT THE ACTION OF VARIABLE FRICTION FORCES
von: Zadorozhniaia, I. N., et al.
Veröffentlicht: (2018)
von: Zadorozhniaia, I. N., et al.
Veröffentlicht: (2018)
The choice of methods znosotyykosty improving vehicle appointment
von: Остапчук, Віктор Миколайович
Veröffentlicht: (2014)
von: Остапчук, Віктор Миколайович
Veröffentlicht: (2014)
The choice of methods znosotyykosty improving vehicle appointment
von: Остапчук, Віктор Миколайович
Veröffentlicht: (2014)
von: Остапчук, Віктор Миколайович
Veröffentlicht: (2014)
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
On the prediction of erosive wear of the heat-transfer surfaces of boiler equipment
von: Yatsenko V.P.
Veröffentlicht: (2006)
von: Yatsenko V.P.
Veröffentlicht: (2006)
Influence of hydrogen on wear resistance of material in a friction pair of braking device
von: M. V. Kindrachuk, et al.
Veröffentlicht: (2017)
von: M. V. Kindrachuk, et al.
Veröffentlicht: (2017)
An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
von: Yatsenko V.P., et al.
Veröffentlicht: (2009)
von: Yatsenko V.P., et al.
Veröffentlicht: (2009)
The Effect of Metal Fibres and Borax Powders on the Wear and Friction Performances of the Organic Based Brake Pads
von: İrem Burcu Algan, et al.
Veröffentlicht: (2017)
von: İrem Burcu Algan, et al.
Veröffentlicht: (2017)
Modeling of frictional heating during braking
von: O. Yevtushenko, et al.
Veröffentlicht: (2012)
von: O. Yevtushenko, et al.
Veröffentlicht: (2012)
Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
von: Лебедев, Владимир, et al.
Veröffentlicht: (2014)
von: Лебедев, Владимир, et al.
Veröffentlicht: (2014)
Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
von: Лебедев, Владимир, et al.
Veröffentlicht: (2014)
von: Лебедев, Владимир, et al.
Veröffentlicht: (2014)
Modeling of the abrasive wear of convective heat transfer surfaces of a boiler
von: Shraiber O.A., et al.
Veröffentlicht: (2008)
von: Shraiber O.A., et al.
Veröffentlicht: (2008)
Influence of friction power on temperature during braking
von: K. Topchevska
Veröffentlicht: (2017)
von: K. Topchevska
Veröffentlicht: (2017)
ОПТИМАЛЬНЕ РОЗТАШУВАННЯ ДЕГАЗАЦІЙНИХ СВЕРДЛОВИН У МЕЖАХ ГІРНИЧОГО ВІДВОДУ ВУГІЛЬНИХ ШАХТ ЗА ДАНИМИ СТАГД
von: Dubosarskiy, V.
Veröffentlicht: (2015)
von: Dubosarskiy, V.
Veröffentlicht: (2015)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
von: S. A. Askerov
Veröffentlicht: (2020)
von: S. A. Askerov
Veröffentlicht: (2020)
Influence of the friction power on the temperature stresses during single braking
von: K. Topchevska
Veröffentlicht: (2017)
von: K. Topchevska
Veröffentlicht: (2017)
Numerical and analytical solutions of the heat problem of friction during braking
von: O. Yevtushenko, et al.
Veröffentlicht: (2011)
von: O. Yevtushenko, et al.
Veröffentlicht: (2011)
Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
Modern Polymer Composites for Friction and Wear Applications
von: K. Friedrich, et al.
Veröffentlicht: (2012)
von: K. Friedrich, et al.
Veröffentlicht: (2012)
The influence of hydrogen on friction and wear of metals (Review)
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2012)
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2012)
Equivalent cable harness method generalized for predicting the electromagnetic emission of twisted-wire pairs
von: Bensiammar, S., et al.
Veröffentlicht: (2022)
von: Bensiammar, S., et al.
Veröffentlicht: (2022)
Dominance of multicomponents and multiayer coverages on friction processes and wear
von: V. M. Beresnev
Veröffentlicht: (2004)
von: V. M. Beresnev
Veröffentlicht: (2004)
Effect of Pin Diameters on the Wear Characteristics of Friction Pairs
von: Wei, Y.H., et al.
Veröffentlicht: (2019)
von: Wei, Y.H., et al.
Veröffentlicht: (2019)
INVESTIGATION OF ENERGY PARAMETERS OF BIOMATERIAL CONVERSION PROCESS IN CLOSED FERMENTATION CHAMBER
von: Tereshchuk, M., et al.
Veröffentlicht: (2021)
von: Tereshchuk, M., et al.
Veröffentlicht: (2021)
Rational powers of thermal generators for starting pre-heaters of vehicles
von: Ya. Mykhailovsky, et al.
Veröffentlicht: (2015)
von: Ya. Mykhailovsky, et al.
Veröffentlicht: (2015)
Friction and Wear Behavior of Wear-Resistant Belts in Drill Joints for Deep and Ultra-Deep Wells
von: Zhang, K., et al.
Veröffentlicht: (2018)
von: Zhang, K., et al.
Veröffentlicht: (2018)
VARIATIONS OF PLASMA TEMPERATURES IN IONOSPHERE OVER KHARKIV IN THE SOLAR ACTIVITY GROWTH PHASE
von: Siusiuk, M. M., et al.
Veröffentlicht: (2016)
von: Siusiuk, M. M., et al.
Veröffentlicht: (2016)
Influence of molibdenium under the hightemperature friction of titatium materials on wear
von: A. M. Petrova, et al.
Veröffentlicht: (2011)
von: A. M. Petrova, et al.
Veröffentlicht: (2011)
Ähnliche Einträge
-
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
von: Velizade, Evren S.
Veröffentlicht: (2020) -
Minimization of fracture parameters for friction pair hub
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015) -
Minimization of fracture parameters for friction pair hub
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015) -
Optimum displacement function of external contour points of contact pair hub taking into account the thermal stresses and roughness inner contour
von: Ахундова, Парвана Эльман гызы
Veröffentlicht: (2014) -
Optimum displacement function of external contour points of contact pair hub taking into account the thermal stresses and roughness inner contour
von: Ахундова, Парвана Эльман гызы
Veröffentlicht: (2014)