Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
Operation of structures in high temperature conditions and aggressive environments leads to such phenomena as corrosion and material damage. Corrosion leads to a reduction in structural cross-section and, consequently, an increase in stresses. As to material damage, namely, the appearance of micro-c...
Gespeichert in:
| Datum: | 2020 |
|---|---|
| 1. Verfasser: | Fridman, Мark M. |
| Format: | Artikel |
| Sprache: | Englisch Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2020
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/214531 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Journal of Mechanical Engineering |
Institution
Journal of Mechanical EngineeringÄhnliche Einträge
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020)
von: Fridman, Мark M.
Veröffentlicht: (2020)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)
von: Fridman, Мark M.
Veröffentlicht: (2019)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)
von: Fridman, Мark M.
Veröffentlicht: (2019)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018)
von: Fridman, Mark M.
Veröffentlicht: (2018)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018)
von: Fridman, Mark M.
Veröffentlicht: (2018)
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
von: Фридман, М. М.
Veröffentlicht: (2017)
von: Фридман, М. М.
Veröffentlicht: (2017)
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
von: Фридман, М. М.
Veröffentlicht: (2017)
von: Фридман, М. М.
Veröffentlicht: (2017)
Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)
von: Фридман, М. М.
Veröffentlicht: (2016)
Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)
von: Фридман, М. М.
Veröffentlicht: (2016)
Prediction of Flow Accelerated Corrosion of NPP Pipeline Elements by Network Simulation Method
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
Prediction of Flow Accelerated Corrosion of NPP Pipeline Elements by Network Simulation Method
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
FUNCTIONAL DAMAGE OF RADIO ELECTRONIC SYSTEMS
von: Chernogor, L. F.
Veröffentlicht: (2021)
von: Chernogor, L. F.
Veröffentlicht: (2021)
Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
Methods to Reduce Material Intensity of Tail Sections of Launch Vehicles
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)
Methods to Reduce Material Intensity of Tail Sections of Launch Vehicles
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)
Vibration features of titanium alloy blades with erosive damages
von: Vorobiov, Yu. S., et al.
Veröffentlicht: (2019)
von: Vorobiov, Yu. S., et al.
Veröffentlicht: (2019)
Vibration features of titanium alloy blades with erosive damages
von: Vorobiov, Yu. S., et al.
Veröffentlicht: (2019)
von: Vorobiov, Yu. S., et al.
Veröffentlicht: (2019)
Justification of the advantages of using optical and radar remote sensing data in detecting buildings damaged by natural or anthropogenic impacts
von: Skrypnyk, Liliia, et al.
Veröffentlicht: (2024)
von: Skrypnyk, Liliia, et al.
Veröffentlicht: (2024)
Forest damage assessment of a part of Kupyansk forestry due to fires caused by military actions
von: Popov, Mykhailo, et al.
Veröffentlicht: (2025)
von: Popov, Mykhailo, et al.
Veröffentlicht: (2025)
Electromagnetic processes in an inductor system with a single thin round turn with a cut above a thin metal sheet
von: Gnatov, A. V.
Veröffentlicht: (2012)
von: Gnatov, A. V.
Veröffentlicht: (2012)
Assessment of changes in the technical condition of damaged multi-story buildings by using artificial intelligence
von: Berchun, Yaroslav, et al.
Veröffentlicht: (2025)
von: Berchun, Yaroslav, et al.
Veröffentlicht: (2025)
Geoinformation tool for remote assessment of shelterbelts damaged by military actions
von: Andreiev, Artem, et al.
Veröffentlicht: (2025)
von: Andreiev, Artem, et al.
Veröffentlicht: (2025)
Experimental study of the thermal conductivity of composite materials collectors of solar energy
von: Reztsov, V., et al.
Veröffentlicht: (2016)
von: Reztsov, V., et al.
Veröffentlicht: (2016)
A STUDY OF MATERIAL RECOGNITION ACCURACY BY RADIO WAVE METHODS
von: Ovsyannikov, V. V., et al.
Veröffentlicht: (2023)
von: Ovsyannikov, V. V., et al.
Veröffentlicht: (2023)
ОСОБЛИВОСТІ ЕЛЕКТРООСАДЖЕННЯ СПЛАВА КОБАЛЬТ–ВОЛЬФРАМ–РЕНІЙ
von: Yapontseva, Yuliya, et al.
Veröffentlicht: (2019)
von: Yapontseva, Yuliya, et al.
Veröffentlicht: (2019)
Designing finishing materials with a gradient of electrophysical properties
von: Biruk, Yana
Veröffentlicht: (2022)
von: Biruk, Yana
Veröffentlicht: (2022)
A REFINED MATHEMATICAL MODEL OF MULTIPHYSICS PROCESSES FOR MAGNETIC PULSE TREATMENT OF MATERIALS
von: Baida, E. I.
Veröffentlicht: (2015)
von: Baida, E. I.
Veröffentlicht: (2015)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
THE EVALUATION OF ENERGETIC POTENTIAL OF BIOMASS OF SEA BUCKTHORN (HYPPOPHAE RHAMNOIDES) PLANTS, GROWN ON TECHNOLOGICALLY DAMAGED OIL-POLLUTED SOILS
von: Shevchyk-Kostiuk , L., et al.
Veröffentlicht: (2025)
von: Shevchyk-Kostiuk , L., et al.
Veröffentlicht: (2025)
Ecologically clean evaporation-condensation method application for obtaining of electrical contacts based on copper composite materials
von: Grechanuyk, V.G., et al.
Veröffentlicht: (2018)
von: Grechanuyk, V.G., et al.
Veröffentlicht: (2018)
Еnergy-saving technology for processing of galvanic sludge with obtaining of radio-absorbing materials
von: Samchenko, Dmitry N., et al.
Veröffentlicht: (2020)
von: Samchenko, Dmitry N., et al.
Veröffentlicht: (2020)
BOTTOM CARBONATE STRUCTURES – THE OBJECTS FOR SEARCHES OF HYDROCARBON RAW MATERIAL
von: Sokur, O.N., et al.
Veröffentlicht: (2019)
von: Sokur, O.N., et al.
Veröffentlicht: (2019)
AN ANTHOLOGY OF OUTSTANDING ACHIEVEMENTS IN SCIENCE AND TECHNOLOGY. PART 17: INVENTIONS IN MATERIAL WELDING
von: Baranov, M. I.
Veröffentlicht: (2013)
von: Baranov, M. I.
Veröffentlicht: (2013)
Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
AN ANTHOLOGY OF OUTSTANDING ACHIEVEMENTS IN SCIENCE AND TECHNOLOGY. PART 10: DISCOVERY AND RESEARCH ON SUPERCONDUCTIVITY OF MATERIALS
von: Baranov, M. I.
Veröffentlicht: (2012)
von: Baranov, M. I.
Veröffentlicht: (2012)
Methodological approach to determining promising “quarry cavities – backfill material” systems on the territory of Ukraine
von: Petlovanyi, Mykhailo V., et al.
Veröffentlicht: (2023)
von: Petlovanyi, Mykhailo V., et al.
Veröffentlicht: (2023)
AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 41: COMPOSITE MATERIALS: THEIR CLASSIFICATION, TECHNOLOGIES OF MAKING, PROPERTIES AND APPLICATION DOMAINS IN MODERN TECHNIQUE
von: Baranov, M. I.
Veröffentlicht: (2017)
von: Baranov, M. I.
Veröffentlicht: (2017)
Ähnliche Einträge
-
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020) -
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019) -
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019) -
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018) -
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018)