Analysis of Crack Growth in the Wall of an Electrolyser Compartment
Electrolysis units are widely used in different branches of industry. They are high-pressure tanks, each having a chamber and electrodes placed therein, which are arranged in assemblies, a cover as well as an inlet and outlet pipes. High requirements are imposed on their technical characteristics, c...
Gespeichert in:
| Datum: | 2021 |
|---|---|
| Hauptverfasser: | Hontarovskyi, Pavlo P., Smetankina, Natalia V., Garmash, Nataliia H., Melezhyk, Iryna I. |
| Format: | Artikel |
| Sprache: | Englisch Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2021
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/222819 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Journal of Mechanical Engineering |
Institution
Journal of Mechanical EngineeringÄhnliche Einträge
Analysis of Crack Growth in the Wall of an Electrolyser Compartment
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)
Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 2. Analysis Results
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019)
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019)
Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 2. Analysis Results
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019)
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019)
Crack nucleation in an isotropic medium under non-uniform stress field
von: Оруджева, Р. У.
Veröffentlicht: (2015)
von: Оруджева, Р. У.
Veröffentlicht: (2015)
Crack nucleation in an isotropic medium under non-uniform stress field
von: Оруджева, Р. У.
Veröffentlicht: (2015)
von: Оруджева, Р. У.
Veröffentlicht: (2015)
Analysis of stress-strain state of Caucasus region (Azerbaijan) on the basis of maximum horizontal stress vectors and "World Stress Map" application technique
von: Babayev, G.P., et al.
Veröffentlicht: (2017)
von: Babayev, G.P., et al.
Veröffentlicht: (2017)
Stress-deformable state near the earthquake focus
von: Lubkov, M.V.
Veröffentlicht: (2025)
von: Lubkov, M.V.
Veröffentlicht: (2025)
Methods to Reduce Material Intensity of Tail Sections of Launch Vehicles
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)
Methods to Reduce Material Intensity of Tail Sections of Launch Vehicles
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)
Contact deformation of the pipeline sealing unit
von: Kostikov, Andrii O., et al.
Veröffentlicht: (2021)
von: Kostikov, Andrii O., et al.
Veröffentlicht: (2021)
Contact deformation of the pipeline sealing unit
von: Kostikov, Andrii O., et al.
Veröffentlicht: (2021)
von: Kostikov, Andrii O., et al.
Veröffentlicht: (2021)
Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
von: Гасанов, Шахин
Veröffentlicht: (2015)
von: Гасанов, Шахин
Veröffentlicht: (2015)
Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
von: Гасанов, Шахин
Veröffentlicht: (2015)
von: Гасанов, Шахин
Veröffentlicht: (2015)
Closure of a curvilinear crack in sheet element under influence of temperature field
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)
Closure of a curvilinear crack in sheet element under influence of temperature field
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)
Comprehensive research of stress–strain state of full – scale spiral case of francis turbine РО400–B–450 as not concreted
von: Ровний, К. М., et al.
Veröffentlicht: (2015)
von: Ровний, К. М., et al.
Veröffentlicht: (2015)
Comprehensive research of stress–strain state of full – scale spiral case of francis turbine РО400–B–450 as not concreted
von: Ровний, К. М., et al.
Veröffentlicht: (2015)
von: Ровний, К. М., et al.
Veröffentlicht: (2015)
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
Thermal and Stress-Strain State of Cast Bodies of Control Valves of 200 MW Power Units
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)
Thermal and Stress-Strain State of Cast Bodies of Control Valves of 200 MW Power Units
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)
Effect of local temperature field on retardation of curvilinear crack with allowance of plastic deformation
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
Effect of local temperature field on retardation of curvilinear crack with allowance of plastic deformation
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
Stressed State of a Hollow Cylinder with a System of Cracks under Longitudinal Shear Harmonic Oscillations
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)
Stressed State of a Hollow Cylinder with a System of Cracks under Longitudinal Shear Harmonic Oscillations
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
Improving geometry and reliability multisupporting long tail compounds steam turbine blades
von: Бояршинов, А. Ю.
Veröffentlicht: (2014)
von: Бояршинов, А. Ю.
Veröffentlicht: (2014)
Improving geometry and reliability multisupporting long tail compounds steam turbine blades
von: Бояршинов, А. Ю.
Veröffentlicht: (2014)
von: Бояршинов, А. Ю.
Veröffentlicht: (2014)
Experimental study of dynamic deformation structuredmedium under the impulse loading
von: Mykulyak, S. V., et al.
Veröffentlicht: (2014)
von: Mykulyak, S. V., et al.
Veröffentlicht: (2014)
Deformations in the Upper Cretaceous — Neogene sediments of the South-Western Crimea on the base of new tectonophysical data
von: Murovskaya, A., et al.
Veröffentlicht: (2014)
von: Murovskaya, A., et al.
Veröffentlicht: (2014)
Study of the stressed state near the crack that initiates at the inclusion under longitudinal shift wave influence
von: Misharin, A. S., et al.
Veröffentlicht: (2019)
von: Misharin, A. S., et al.
Veröffentlicht: (2019)
Study of the stressed state near the crack that initiates at the inclusion under longitudinal shift wave influence
von: Misharin, A. S., et al.
Veröffentlicht: (2019)
von: Misharin, A. S., et al.
Veröffentlicht: (2019)
Basic operation principles and control algorithm for a high-pressure membrane-less electrolyser
von: Solovei, V. V., et al.
Veröffentlicht: (2019)
von: Solovei, V. V., et al.
Veröffentlicht: (2019)
Basic operation principles and control algorithm for a high-pressure membrane-less electrolyser
von: Solovei, V. V., et al.
Veröffentlicht: (2019)
von: Solovei, V. V., et al.
Veröffentlicht: (2019)
Express-analysis when modeling the stress-strain state of stamp rigging elements
von: Демина, Н. А.
Veröffentlicht: (2015)
von: Демина, Н. А.
Veröffentlicht: (2015)
Express-analysis when modeling the stress-strain state of stamp rigging elements
von: Демина, Н. А.
Veröffentlicht: (2015)
von: Демина, Н. А.
Veröffentlicht: (2015)
Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Analysis of Crack Growth in the Wall of an Electrolyser Compartment
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021) -
Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 2. Analysis Results
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019) -
Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 2. Analysis Results
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019) -
Crack nucleation in an isotropic medium under non-uniform stress field
von: Оруджева, Р. У.
Veröffentlicht: (2015) -
Crack nucleation in an isotropic medium under non-uniform stress field
von: Оруджева, Р. У.
Veröffentlicht: (2015)