Optimal Design of Single-Layered Reinforced Cylindrical Shells

• Дата: 2021
• Автор: Филатов, Г. В.
• Формат: Стаття
• Мова: Russian; English
• Опубліковано: Journal of Mechanical Engineering 2021
• Онлайн доступ: https://journals.uran.ua/jme/article/view/227423
• Назва журналу: Journal of Mechanical Engineering

This paper discusses the application of the random search method for the optimal design of single-layered reinforced cylindrical shells operating in a neutral environment. When setting a mathematical programming problem, the minimum shell weight is considered as an objective function. The critical stresses are determined according to the linear theory in the elastic region of the material. As the constraints imposed on the feasible region, the constraints on the strength, general buckling and partial buckling of a shell are accepted. The aim of this paper is to study the weight efficiency of various types of shell reinforcements and the influence of an optimum-weight shell on the parameters of an axially-compressed one. A numerical experiment was carried out. Dependencies of shell weight, wall thickness, and reinforcement parameters on the magnitude of a compressive load were investigated for shells with different types of reinforcement. As a result of the numerical experiment performed, it was found that with an increase in compressive load magnitude, there is a tendency to an increase in the wall thickness of an optimal shell, with an increase in the thickness of longitudinal stiffeners (stringers) and a slight decrease in the number of ribs. In addition, it should be noted that the general case of buckling and the first special one turned out to be decisive in choosing optimal shell parameters.