Buchumschlag

Cycle-Tempo Simulation of Ultra-Micro Gas Turbine Fueled by Producer Gas Resulting from Leaf Waste Gasification

Leaf waste has the potential to be converted into energy because of its high availability both in the world and Indonesia. Gasification is a conversion technology that can be used to convert leaves into producer gas. This gas can be used for various applications, one of which is using it as fuel for...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
Hauptverfasser:	Vidian, Fajri, Peranginangin, Putra Anugrah, Yulianto, Muhamad
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2021
Online Zugang:	https://journals.uran.ua/jme/article/view/232704
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Cycle-Tempo Simulation of Ultra-Micro Gas Turbine Fueled by Producer Gas Resulting from Leaf Waste Gasification
von: Vidian, Fajri, et al.
Veröffentlicht: (2021)

Cycle-Tempo Simulation of Ultra-Micro Gas Turbine Fueled by Producer Gas Resulting from Leaf Waste Gasification
von: F. Vidian, et al.
Veröffentlicht: (2021)

Gasification as a Method of Wastes Treatment
von: K. E. Pjanykh
Veröffentlicht: (2015)

Technologies for the Production of Fuels by Gasification of Biomaterials and Wastes (On the Materials of the Gasification 2019 Summit, Brucell)
von: V. I. Rudyka, et al.
Veröffentlicht: (2019)

Plasma Gasification of Waste as Energy Saving Method
von: A. N. Brattsev, et al.
Veröffentlicht: (2012)

Investigation and Implementation of Coal and Biomass Gasification Processes for Natural Gas Substitution
von: I. N. Karp, et al.
Veröffentlicht: (2014)

Fuel Gasification with Adsorptive Air Separation and Natural Gas Substitute Manufacture
von: A. V. Stepanov, et al.
Veröffentlicht: (2010)

The efficiency of using polymeric micro- and nanocomposites for heat exchangers of gas-gas type
von: N. M. Fialko, et al.
Veröffentlicht: (2017)

Cinematic tempo-rhythm patterns in the prose of Volodymyr Drozd
von: O. Braiko
Veröffentlicht: (2016)

Complex Cycle Gas Turbine Engines for Oil and Gas Transport Installation
von: V. T. Matveenko, et al.
Veröffentlicht: (2010)

THE MICRO- AND NANOSECOND DISCHARGES IN GAS BUBBLES FOR WATER DISINFECTION AND PURIFICATION
von: Boyko, N. I., et al.
Veröffentlicht: (2019)

Experience of the development of USA gas producing industry
von: D. O. Yeher, et al.
Veröffentlicht: (2018)

Experience of the development of USA gas producing industry
von: Yeger D.O., et al.
Veröffentlicht: (2018)

Estimates of processing of coal and waste their enrichment method steam-plasma gasification
von: S. L. Davydov
Veröffentlicht: (2013)

The Exergic Analysis of Simple Cycle Gas Turbine Engine
von: S. P. Krushnevich
Veröffentlicht: (2011)

Unsteady tempo and mere accident (from the history of Franko studies of 1880s - 1940s)
von: L. Skupeiko
Veröffentlicht: (2015)

Opportunities for substituting natural gas with locally produced coal
von: Stohniy O.V., et al.
Veröffentlicht: (2014)

Low-cycle fatigue calculation of gas turbine engine disks under flight cycle conditions
von: Karimbaev, K.D., et al.
Veröffentlicht: (2009)

JUSTIFICATION OF PARAMETERS AND HEATING MODES OF A PYROLYSIS-GASIFICATION UNIT WITH INTEGRATED PROCESSES OF SYNTHESIS GAS CLEANING AND ENRICHMENT
von: Omarov , I.
Veröffentlicht: (2026)

Nuclear Fuel Cycle with Minimized Waste
von: V. Moiseenko, et al.
Veröffentlicht: (2019)

Oh the possibilities and problems of using coal and coal-produced synthesis gas in binary gas-steam-turbine plants
von: Kovetskiy V.M., et al.
Veröffentlicht: (2002)

Cleaning of waste water from direct dyes by the ultra- and nanofiltration ceramic membranes
von: Ju. Dulneva, et al.
Veröffentlicht: (2013)

OVERVIEW OF VORTEX TECHNOLOGIES FOR THE UTILIZATION OF LOW- AND MEDIUM-CALORIFIC GASES IN WASTE-TO-ENERGY AND WASTE-TO-GAS TECHNOLOGIES
von: Kobzar , S., et al.
Veröffentlicht: (2025)

Conversion of gas engine waste heat into cold using absorption chillers
von: G. Karman, et al.
Veröffentlicht: (2020)

Features of Diversification of Activities of Gas Transmission Operators in the Context of Life Cycle Stages
von: O. H. Dzoba, et al.
Veröffentlicht: (2016)

Features of Producing Aluminum From Wastes of Foundry
von: V. V. Dovbenko, et al.
Veröffentlicht: (2020)

Using of corundum forms with burns models to produce parts of the gas-turbine plants
von: V. V. Lashneva, et al.
Veröffentlicht: (2015)

Roof rock shift influence on gas emission from the mine waste space
von: I. I. Klochko, et al.
Veröffentlicht: (2010)

Heat recovery of the waste gas boilers, in combined heat and mass transfer apparatus
von: Tuz V.E., et al.
Veröffentlicht: (2011)

Designing a thermodynamic cycle of an automobile internal combustion engine working on power gas
von: D. S. Dovzhenko
Veröffentlicht: (2014)

Analysis of polytropic subatmospheric cycle of gas turbine unit with Maisotsenko heat and mass exchanger
von: A. A. Khalatov, et al.
Veröffentlicht: (2016)

Numerical analysis of the features of limiting state of welded pipeline elements under ultra-low-cycle loading
von: O. V. Makhnenko, et al.
Veröffentlicht: (2021)

Cyclic operation of the device of thermal energy extraction from the waste oil and gas wells
von: A. V. Buchko, et al.
Veröffentlicht: (2017)

Cyclic operation of the device of thermal energy extraction from the waste oil and gas wells
von: Buchko, A., et al.
Veröffentlicht: (2017)

Analysis of thermodynamic cycle of gas turbine plant of nuclear modular power installation with helium reactor
von: A. A. Khalatov, et al.
Veröffentlicht: (2015)

The System of Waste Management of Complete Integrated Cycle Metallurgical Enterprise
von: Ju. Nazjuta, et al.
Veröffentlicht: (2013)

Leaf nitrogen: photosynthesis and remobilization
von: D. A. Kirizij
Veröffentlicht: (2017)

Evaluation of the reduction of greenhouse gas emissions when producing artificial graphite in electrothermal fluidized bed
von: M. V. Hubynskyi, et al.
Veröffentlicht: (2022)

On new approach to determination of heat-producing of natural gas supplied to consumers and its cubic metrobarometry
von: Y. Svoren
Veröffentlicht: (2019)

Gas-abrasive wear resis-tance at elevated temperatures of coatings produced using arc metallization
von: V. I. Pokhmurskij, et al.
Veröffentlicht: (2013)