Creation of Optimal Design of Runner Oil System of Kaplan Hydro-Turbines
The main objectives of the reconstruction are stated. Those are: increase of the service life of the hydro-turbines of Dnipro Cascade, enhancement of their efficiency, power, and environmental safety, extension of the power control range of the hydro-power plants, assurance of the reliability and im...
Saved in:
| Date: | 2021 |
|---|---|
| Main Authors: | Субботин, В. Г., Бураков, А. С., Ефименко, В. Н., Старченко, А. Ю., Ковалёв, Ю. Н., Рассовский, В. Л. |
| Format: | Article |
| Language: | English Ukrainian |
| Published: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2021
|
| Online Access: | https://journals.uran.ua/jme/article/view/240565 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Journal of Mechanical Engineering |
Institution
Journal of Mechanical EngineeringSimilar Items
Creation of Optimal Design of Runner Oil System of Kaplan Hydro-Turbines
by: Субботин, В. Г., et al.
Published: (2021)
by: Субботин, В. Г., et al.
Published: (2021)
Creation of Optimal Design of Runner Oil System of Kaplan Hydro-Turbines
by: V. H. Subotin, et al.
Published: (2021)
by: V. H. Subotin, et al.
Published: (2021)
Analysis of Stress-Strain State and Contact Pressures on Surfaces of Kaplan Runner Blade Bearing Bronze Bushes
by: Субботин, В. Г., et al.
Published: (2021)
by: Субботин, В. Г., et al.
Published: (2021)
Analysis of Stress-Strain State and Contact Pressures on Surfaces of Kaplan Runner Blade Bearing Bronze Bushes
by: Субботин, В. Г., et al.
Published: (2021)
by: Субботин, В. Г., et al.
Published: (2021)
Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
by: Веремеенко, И. С., et al.
Published: (2014)
by: Веремеенко, И. С., et al.
Published: (2014)
Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
by: Веремеенко, И. С., et al.
Published: (2014)
by: Веремеенко, И. С., et al.
Published: (2014)
Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
by: I. S. Veremeenko, et al.
Published: (2014)
by: I. S. Veremeenko, et al.
Published: (2014)
Analysis of Stress-Strain State and Contact Pressures on Surfaces of Kaplan Runner Blade Bearing Bronze Bushes
by: V. H. Subotin, et al.
Published: (2021)
by: V. H. Subotin, et al.
Published: (2021)
Effect of 3D Shape of Pump-Turbine Runner Blade on Flow Characteristics in Turbine Mode
by: Русанов, А. В., et al.
Published: (2023)
by: Русанов, А. В., et al.
Published: (2023)
Effect of 3D Shape of Pump-Turbine Runner Blade on Flow Characteristics in Turbine Mode
by: Русанов, А. В., et al.
Published: (2023)
by: Русанов, А. В., et al.
Published: (2023)
Computational and experimental investigations of the dynamic characteristics of the blades of the model kaplan turbine
by: Рябов, А. В., et al.
Published: (2014)
by: Рябов, А. В., et al.
Published: (2014)
Computational and experimental investigations of the dynamic characteristics of the blades of the model kaplan turbine
by: Рябов, А. В., et al.
Published: (2014)
by: Рябов, А. В., et al.
Published: (2014)
EFFECT OF GEOMETRICAL PARAMETERS OF PUMP-TURBINE RUNNERS ON ENERGY CHARACTERISTICS
by: Khoryev , O., et al.
Published: (2025)
by: Khoryev , O., et al.
Published: (2025)
Effect of 3D Shape of Pump-Turbine Runner Blade on Flow Characteristics in Turbine Mode
by: A. V. Rusanov, et al.
Published: (2022)
by: A. V. Rusanov, et al.
Published: (2022)
Computational and experimental investigations of the dynamic characteristics of the blades of the model kaplan turbine
by: A. V. Rjabov, et al.
Published: (2014)
by: A. V. Rjabov, et al.
Published: (2014)
Use of Computer Technology in Modernization of Head Covers for ПЛ 20-В-500 Kaplan Turbines
by: Strelnikova, E. A., et al.
Published: (2018)
by: Strelnikova, E. A., et al.
Published: (2018)
Use of Computer Technology in Modernization of Head Covers for ПЛ 20-В-500 Kaplan Turbines
by: Strelnikova, E. A., et al.
Published: (2018)
by: Strelnikova, E. A., et al.
Published: (2018)
Use of Computer Technology in Modernization of Head Covers for PL 20-V-500 Kaplan Turbines
by: E. A. Strelnikova, et al.
Published: (2018)
by: E. A. Strelnikova, et al.
Published: (2018)
Hydraulic pumps utilization features in turbine modes for small hydro power
by: I. M. Holovanov
Published: (2012)
by: I. M. Holovanov
Published: (2012)
Modelling of three-dimensional viscous fluid flow in the flowing part of the axial adjustable-blade (kaplan) hydraulic turbine
by: A. V. Rusanov, et al.
Published: (2010)
by: A. V. Rusanov, et al.
Published: (2010)
Computational and experimental investigations of flow parts PL20 for rehabilitation of hydraulic turbines of kremenchug hydro power plant
by: Линник, А. В., et al.
Published: (2016)
by: Линник, А. В., et al.
Published: (2016)
Computational and experimental investigations of flow parts PL20 for rehabilitation of hydraulic turbines of kremenchug hydro power plant
by: Линник, А. В., et al.
Published: (2016)
by: Линник, А. В., et al.
Published: (2016)
Model of optimal use of hydro power plants in the electricity market
by: I. V. Blinov, et al.
Published: (2022)
by: I. V. Blinov, et al.
Published: (2022)
Darrieus wind turbine with direct controllable blades: experience creation, testing, performance optimization
by: V. P. Kajan, et al.
Published: (2015)
by: V. P. Kajan, et al.
Published: (2015)
Influence of hydro-carbon composition of basic petroleum oils on the oxidation of high temperature greases
by: L. V. Zheleznyi
Published: (2015)
by: L. V. Zheleznyi
Published: (2015)
IMMITATION MODEL OF A HYDRO TURBINE FOR COMPREHENSIVE MODELING OF HYDROELECTRIC POWER PLANT ELECTROMECHANICAL SYSTEM
by: Popovych, O., et al.
Published: (2023)
by: Popovych, O., et al.
Published: (2023)
Determining design parameters for small hydro power plant when controlling the power by watercourse
by: M. R. Ibrahimova
Published: (2016)
by: M. R. Ibrahimova
Published: (2016)
Computational and experimental investigations of flow parts PL20 for rehabilitation of hydraulic turbines of Kremenchug hydro power plant
by: A. V. Linnik, et al.
Published: (2016)
by: A. V. Linnik, et al.
Published: (2016)
Determination of the period of subcritical growth of internal surface corrosive-mechanical crack in the oil pipeline pipe under turbulent flow of oil and hydro blows
by: Ye. Andreikiv, et al.
Published: (2017)
by: Ye. Andreikiv, et al.
Published: (2017)
The turbine drive feed pumps designing, based on the low-mass-flow LPI turbines
by: Гринман, М. И., et al.
Published: (2012)
by: Гринман, М. И., et al.
Published: (2012)
The turbine drive feed pumps designing, based on the low-mass-flow LPI turbines
by: M. I. Grinman, et al.
Published: (2012)
by: M. I. Grinman, et al.
Published: (2012)
The turbine drive feed pumps designing, based on the low-mass-flow LPI turbines
by: Гринман, М. И., et al.
Published: (2012)
by: Гринман, М. И., et al.
Published: (2012)
Model of optimal allocation of hydro-resources of HPP with capacity reservation for automatic asymmetrical frequency restoration
by: Ye. V. Parus, et al.
Published: (2024)
by: Ye. V. Parus, et al.
Published: (2024)
PRODUCTION PUMPS IN THE COMPOSITION OF SMALL PUMPED HYDRO ENERGY STORAGE AS A REVERSIBLE HYDRO MACHINE
by: Verbovij, A.
Published: (2018)
by: Verbovij, A.
Published: (2018)
Production pumps in the composition of small pumped hydro energy storage as a reversible hydro machine
by: A. P. Verbovyi
Published: (2018)
by: A. P. Verbovyi
Published: (2018)
Test rig of OJSC «Turboatom» for physical simulation of hydrodynamic process in water passages of model Kaplan hydroturbines
by: Линник, А. В., et al.
Published: (2014)
by: Линник, А. В., et al.
Published: (2014)
Test rig of OJSC «Turboatom» for physical simulation of hydrodynamic process in water passages of model Kaplan hydroturbines
by: Линник, А. В., et al.
Published: (2014)
by: Линник, А. В., et al.
Published: (2014)
Effective Formalization of Design Processes as a Key Factor in Achieving Optimal Solutions When Creating the Final Stages of Steam Turbines
by: Тарелін, А. О., et al.
Published: (2026)
by: Тарелін, А. О., et al.
Published: (2026)
Effective Formalization of Design Processes as a Key Factor in Achieving Optimal Solutions When Creating the Final Stages of Steam Turbines
by: Тарелін, А. О., et al.
Published: (2026)
by: Тарелін, А. О., et al.
Published: (2026)
Aerodynamical improvement of design, aerodynamic and power characteristics of “I.P.-L.P.-1” compartment of steam turbine К-325-23,5
by: Солодов, В. Г., et al.
Published: (2016)
by: Солодов, В. Г., et al.
Published: (2016)
Similar Items
-
Creation of Optimal Design of Runner Oil System of Kaplan Hydro-Turbines
by: Субботин, В. Г., et al.
Published: (2021) -
Creation of Optimal Design of Runner Oil System of Kaplan Hydro-Turbines
by: V. H. Subotin, et al.
Published: (2021) -
Analysis of Stress-Strain State and Contact Pressures on Surfaces of Kaplan Runner Blade Bearing Bronze Bushes
by: Субботин, В. Г., et al.
Published: (2021) -
Analysis of Stress-Strain State and Contact Pressures on Surfaces of Kaplan Runner Blade Bearing Bronze Bushes
by: Субботин, В. Г., et al.
Published: (2021) -
Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
by: Веремеенко, И. С., et al.
Published: (2014)