Buchumschlag

Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies

An approach to the experimental and computational study of the shear properties of honeycomb cores (HC) produced using Fused Deposition Modeling (FDM) technology is proposed. The experimental approach is based on a new sample type for testing HCs for shear. This sample contains two HCs and three ste...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	Деревянко, И. И., Успенский, Б. В., Аврамов, К. В., Саленко, А. Ф., Библик, И. В.
Format:	Artikel
Sprache:	Englisch Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2022
Online Zugang:	https://journals.uran.ua/jme/article/view/248515
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies
von: Деревянко, И. И., et al.
Veröffentlicht: (2022)

Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies
von: I. I. Derevianko, et al.
Veröffentlicht: (2021)

Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)

Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)

Vibrations of a Cylindrical Sandwich Shell with a Honeycomb Core Made Using FDM technology
von: Успенский, Б. В., et al.
Veröffentlicht: (2022)

Vibrations of a Cylindrical Sandwich Shell with a Honeycomb Core Made Using FDM technology
von: Успенский, Б. В., et al.
Veröffentlicht: (2022)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2022)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2022)

Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)

Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)

Experimental and Numerical Analysis of the Edge Effect for Corrugated and Honeycomb Fiberboard
von: Hua, G.J., et al.
Veröffentlicht: (2017)

Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: K. V. Avramov, et al.
Veröffentlicht: (2021)

Vibrations of a Cylindrical Sandwich Shell with a Honeycomb Core Made Using FDM technology
von: B. V. Uspenskyi, et al.
Veröffentlicht: (2021)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: K. A. Avramov, et al.
Veröffentlicht: (2022)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: B. V. Uspenskyi, et al.
Veröffentlicht: (2022)

Investigation of heat treatment effect on the strength of Al–Ti bimetal honeycomb core
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2021)

Experimental and numerical analysis of deflected mode of cylindrical tanks with pinches
von: Айнабеков, А. И., et al.
Veröffentlicht: (2015)

Experimental and numerical analysis of deflected mode of cylindrical tanks with pinches
von: Айнабеков, А. И., et al.
Veröffentlicht: (2015)

Application of a layered composite material based on aluminium and titanium alloys to produce welded three-layer honeycomb panels
von: L. V. Petrushynets, et al.
Veröffentlicht: (2022)

Evaluation of thermal resistance of three-layer honeycomb panel produced of alloy YuIPM-1200 by the method of vacuum diffusion welding
von: I. A. Gusarova, et al.
Veröffentlicht: (2016)

Producing of intermetallic alloys of TiAl system with boron and lanthanum additions using the EBCHM method
von: N. P. Trigub, et al.
Veröffentlicht: (2011)

Experimental studies on the shear resistance of original coal-shale joint
von: Guo, B., et al.
Veröffentlicht: (2017)

Mobile honeycomb communication and perspective of its development
von: V. N. Evstafev, et al.
Veröffentlicht: (2017)

Numerical analysis of free vibrations of shells amenable to transversal shear and compression
von: B. A. Zubal, et al.
Veröffentlicht: (2020)

Development of Technology for Producing Dietary Supplements Aminaton and Lipoton using Cryogenic Technology
von: V. E. Grebenshchikov, et al.
Veröffentlicht: (2012)

Non-destructive testing of elements of titanium honeycomb panels by shearography method using vacuum load
von: L. M. Lobanov, et al.
Veröffentlicht: (2021)

Experimental study of shear deformation of the medium formed by the massif of ribbed grains
von: Mykulyak, S.V., et al.
Veröffentlicht: (2021)

Experimental study of shear deformation of the medium formed by the massif of ribbed grains
von: S. V. Mykulyak, et al.
Veröffentlicht: (2021)

Optimization of the procedure of thermal flaw detection of honeycomb structures
von: V. A. Storozhenko, et al.
Veröffentlicht: (2013)

Electronic spectrum and superconductivity in the t-J model on the honeycomb lattice
von: Plakida, N.M.
Veröffentlicht: (2018)

Linear Vibrations Analysis of a Composite Sandwich Conical Shell Manufactured by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2026)

Linear Vibrations Analysis of a Composite Sandwich Conical Shell Manufactured by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2026)

Dictionary of ukrainian language: additional volume. history of making and produced results
von: L. Movchun
Veröffentlicht: (2011)

Effect of aluminium additions to flux-cored wire on properties of high-carbon deposited metal
von: Ju. Krivchikov
Veröffentlicht: (2012)

Application of complexly-alloyed powders, produced by the method of thermocentrifugal spraying, in flux-cored wires
von: A. P. Zhudra, et al.
Veröffentlicht: (2014)

Numerical and experimental study of the thermodynamic efficiency of heat pumps
von: Тарасова, В. А.
Veröffentlicht: (2016)

Numerical and experimental study of the thermodynamic efficiency of heat pumps
von: Тарасова, В. А.
Veröffentlicht: (2016)

Numerical simulation and experimental investigation of remelting processes
von: A. Jardy
Veröffentlicht: (2013)