Buchumschlag

Development of a Methodology for Calculating the Stress State and Resource of a Hydrogen Generator Using the Finite Element Method

An experimental stand was created to study the thermobaric and chemical influence of hydrogen on the identification of hydrocarbon production. The said stand allows to reproduce chemical-technological processes as close as possible to real formation ones. This stand makes it possible to study the ki...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	Гонтаровський, П. П., Сметанкіна, Н. В., Гармаш, Н. Г., Мележик, І. І., Протасова, Т. В.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2022
Online Zugang:	https://journals.uran.ua/jme/article/view/266926
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Development of a Methodology for Calculating the Stress State and Resource of a Hydrogen Generator Using the Finite Element Method
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2022)

Development of a Methodology for Calculating the Stress State and Resource of a Hydrogen Generator Using the Finite Element Method
von: P. P. Hontarovskyi, et al.
Veröffentlicht: (2022)

Calculated Assessment of Crack Development Under Cyclic Loading of the Plate Using the Parameters of Dispersed Damage of the Material
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2024)

Calculated Assessment of Crack Development Under Cyclic Loading of the Plate Using the Parameters of Dispersed Damage of the Material
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2024)

Computer Modeling of the Process for Manufacturing Spherical Vessels from Sheet Steel by Hydroforming
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2026)

Computer Modeling of the Process for Manufacturing Spherical Vessels from Sheet Steel by Hydroforming
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2026)

Strength Assessment of the Gas Turbine Engine Fan Disk Based on Its Fracture Toughness Analysis
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2026)

Strength Assessment of the Gas Turbine Engine Fan Disk Based on Its Fracture Toughness Analysis
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2026)

Presentation of the moment scheme of finite elements to calculate stress-strain state of elastomer in tool systems
von: S. I. Gomenjuk, et al.
Veröffentlicht: (2015)

Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
von: Ju. Prikhodko, et al.
Veröffentlicht: (2013)

Термонапружений стан і тріщиностійкість роторів турбіни К-1000-60/1500 АЕС
von: Шульженко, М.Г., et al.
Veröffentlicht: (2010)

The system of diagnostic of a thermostressed state and operation of a resource for a rotor of a high pressure of turbine T-250/300-240 on stationary and variable operat-ing modes
von: Шульженко, Николай Григорьевич, et al.
Veröffentlicht: (2015)

The system of diagnostic of a thermostressed state and operation of a resource for a rotor of a high pressure of turbine T-250/300-240 on stationary and variable operat-ing modes
von: Шульженко, Николай Григорьевич, et al.
Veröffentlicht: (2015)

Use of the finite elements method to calculate the strength of conical shells with notches
von: Kabanov, V.V., et al.
Veröffentlicht: (1985)

Finite Element Calculation of Clinching with Rigid Die of Three Steel Sheets
von: Kaščák, L., et al.
Veröffentlicht: (2017)

Features of the methodology for calculating the valuation of ecosystem resources
von: O. M. Sukhina
Veröffentlicht: (2021)

Finite Element Analysis of Hyperelastoplastic Mixed-hardening Materials under Plane Stresses
von: J. P. Pascon
Veröffentlicht: (2024)

Study of the stress-strain state of ribbed cylindrical shells by the finite elements method
von: Menabdishvili, P.Z, et al.
Veröffentlicht: (1985)

Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

Finite groups with a system of generalized central elements
von: Shemetkova, O.
Veröffentlicht: (2004)

Finite groups with a system of generalized central elements
von: Shemetkova, Olga
Veröffentlicht: (2018)

Definition of the thermal and thermostressed states of turbine rotor in resource counter
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

Definition of the thermal and thermostressed states of turbine rotor in resource counter
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

Joint finite elements with vector approximation of unknowns for the calculation of thin shells of complex geometry
von: Ye. A. Storozhuk
Veröffentlicht: (2020)

Modelling of the structural elements deformation under conditions of creep, stress corrosion cracking and hydrogenation
von: O. V. Hembara, et al.
Veröffentlicht: (2021)

Finite element simulation of hydrogen influence on the accumulation of damages in the steels under high-temperature creep
von: Jiang Qiongqin, et al.
Veröffentlicht: (2019)

Modeling of stress-strain state by the finite-element method at tests on weldability (PVR-test)
von: K. A. Jushchenko, et al.
Veröffentlicht: (2016)

The influence of hydrogen concentration on stresses in a solid metal cylinder
von: M. H. Stashchuk
Veröffentlicht: (2017)

Corrosion and hydrogen environment influence on the residual resource of structural elements under maneuvering regime of their operation
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)

Analysis of the stress-strain state of the Bridgman specimen by the finite elements method under axial tension
von: T. M. Lenkovskyi, et al.
Veröffentlicht: (2020)

Banach algebra generated by a finite number of bergman polykernel operators, continuous coefficients, and a finite group of shifts
von: Mozel’, V. A., et al.
Veröffentlicht: (2010)

Computational Studies of the Thermal Stress State of Multilayer Glazing with Electric Heating
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2022)

Computational Studies of the Thermal Stress State of Multilayer Glazing with Electric Heating
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2022)

Solar hydrogen generation system
von: Kh. Drahanov, et al.
Veröffentlicht: (2013)

Calculation of stresses in thin plates joined rigidly with a cylinder
von: B. D. Drobenko, et al.
Veröffentlicht: (2016)

On a Banach algebra generated by the Bergman operator, constant coefficients, and finitely generated groups of shifts
von: V. A. Mozel
Veröffentlicht: (2017)

On a Banach algebra generated by the Bergman operator, constant coefficients, and finitely generated groups of shifts
von: Mozel’, V. A., et al.
Veröffentlicht: (2017)

On Calculating the Parameters of Linear Fracture Mechanics in Dynamical Problems Basing on the Semi-analytical Method of Finite Elements
von: M. O. Vabishchevich, et al.
Veröffentlicht: (2018)

Leakage Inductance Calculation of High-Voltage Transformer Windings by Means of the Software using the Finite Elements Method
von: V. O. Brzhezytskyi, et al.
Veröffentlicht: (2014)