Buchumschlag

Improving geometry and reliability multisupporting long tail compounds steam turbine blades

Selection of the most optimal design of low-pressure cylinder's steam pipe for high power steam turbines is not possible without usage of scientific achivements of the last decade. Different software systems can be used to optimize blades' geometry of low-pressure cylinder's steam pip...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
1. Verfasser:	Бояршинов, А. Ю.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2014
Schlagworte:	the last stage of the turbine blade stress-strain state bearing surface of the tooth stress concentration factor photoelasticity method finite element technique blade profile УДК 621.165
Online Zugang:	https://journals.uran.ua/jme/article/view/27173
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Improving geometry and reliability multisupporting long tail compounds steam turbine blades
von: Бояршинов, А. Ю.
Veröffentlicht: (2014)

Experimental Study of the Effects of a Constant and Variable Electric Fields on the Strength Properties of the Blade Steel Surface Layer
von: Nechaev, A. V.
Veröffentlicht: (2019)

Experimental Study of the Effects of a Constant and Variable Electric Fields on the Strength Properties of the Blade Steel Surface Layer
von: Nechaev, A. V.
Veröffentlicht: (2019)

Rotor blades efficiency increase at the last stage of steam turbines
von: Левченко, Е. В., et al.
Veröffentlicht: (2017)

Rotor blades efficiency increase at the last stage of steam turbines
von: Левченко, Е. В., et al.
Veröffentlicht: (2017)

Improving geometry and reliability multisupporting long tail compounds steam turbine blades
von: Ju. Bojarshinov
Veröffentlicht: (2014)

Steam Turbine Low Pressure Cylinder Last Stage by the Blades Spatial Profiling
von: Rusanov, Andrii V., et al.
Veröffentlicht: (2020)

Steam Turbine Low Pressure Cylinder Last Stage by the Blades Spatial Profiling
von: Rusanov, Andrii V., et al.
Veröffentlicht: (2020)

Methods to Reduce Material Intensity of Tail Sections of Launch Vehicles
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)

Methods to Reduce Material Intensity of Tail Sections of Launch Vehicles
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)

Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
von: Palkov, Ihor A., et al.
Veröffentlicht: (2019)

Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
von: Palkov, Ihor A., et al.
Veröffentlicht: (2019)

Aeroelastic behaviour of the turbine blade row in 3D viscous flow
von: Gnesin, V. I., et al.
Veröffentlicht: (2018)

Aeroelastic behaviour of the turbine blade row in 3D viscous flow
von: Gnesin, V. I., et al.
Veröffentlicht: (2018)

THE INFLUENCE OF AERODYNAMIC CHARACTERISTICS OF A BLADE PROFILE ON THE ENERGY CHARACTERISTICS OF A WINDOW ROTOR
von: Holovko, V., et al.
Veröffentlicht: (2019)

The numerical analyzis for unsteady loads and elastic behaviour of the blades in seven stage axial compressor
von: Колодяжная, Л. В.
Veröffentlicht: (2016)

The numerical analyzis for unsteady loads and elastic behaviour of the blades in seven stage axial compressor
von: Колодяжная, Л. В.
Veröffentlicht: (2016)

Stress-Strain State of Steam Turbine Lock Joint under Plastic Deformation
von: Palkov, Ihor A., et al.
Veröffentlicht: (2021)

Stress-Strain State of Steam Turbine Lock Joint under Plastic Deformation
von: Palkov, Ihor A., et al.
Veröffentlicht: (2021)

Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014)

Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014)

Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
von: Чугай, А. М.
Veröffentlicht: (2014)

Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
von: Чугай, А. М.
Veröffentlicht: (2014)

Analysis of Crack Growth in the Wall of an Electrolyser Compartment
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)

Analysis of Crack Growth in the Wall of an Electrolyser Compartment
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)

Aerodynamic optimisation of turbomachinery bladings: approaches, methods, results
von: Ершов, С. В., et al.
Veröffentlicht: (2012)

Aerodynamic optimisation of turbomachinery bladings: approaches, methods, results
von: Ершов, С. В., et al.
Veröffentlicht: (2012)

Analysis of stress-strain state of Caucasus region (Azerbaijan) on the basis of maximum horizontal stress vectors and "World Stress Map" application technique
von: Babayev, G.P., et al.
Veröffentlicht: (2017)

Stress-deformable state near the earthquake focus
von: Lubkov, M.V.
Veröffentlicht: (2025)

THE INFLUENCE OF SOME GEOMETRICAL PARAMETERS ON THE ENERGY INDICATORS OF THE VERTICAL AXIS WIND TURBINES
von: Knysh, L., et al.
Veröffentlicht: (2017)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

Thermal and Stress-Strain State of Cast Bodies of Control Valves of 200 MW Power Units
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)

Thermal and Stress-Strain State of Cast Bodies of Control Valves of 200 MW Power Units
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)

Analytical method for profiling of radial stator blades of turbine stages
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)

Analytical method for profiling of radial stator blades of turbine stages
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)

Development volumetric mathematical models of cooling-dawn steam turbines after stops powerful generating units of thermal power plants
von: Переверзев, Д. А., et al.
Veröffentlicht: (2016)

Energy efficiency of cooling systems of thermal stresses the most powerful turbo units with supercritical and supercritical steam parameters of the initial
von: Переверзев, Д. А., et al.
Veröffentlicht: (2016)

Energy efficiency of cooling systems of thermal stresses the most powerful turbo units with supercritical and supercritical steam parameters of the initial
von: Переверзев, Д. А., et al.
Veröffentlicht: (2016)

Wet steam generation procedure influence on thermodynamic and aerodynamic processes in wet steam zone for experimental researches
von: Скляров, В. П.
Veröffentlicht: (2016)