On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
Differences in mechanisms of damage accumulation for low-cycle and high-cycle fatigue in terms of efficiency of use of the coercive force method in diagnostics of presence of defects in metal under cyclic loading are considered.It is pointed out that, depending on level of loading amplitude, differe...
Saved in:
| Date: | 2014 |
|---|---|
| Main Authors: | Мацевитый, В. М., Вакуленко, К. В., Казак, И. Б. |
| Format: | Article |
| Language: | Russian |
| Published: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2014
|
| Subjects: | |
| Online Access: | https://journals.uran.ua/jme/article/view/27182 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Journal of Mechanical Engineering |
Institution
Journal of Mechanical EngineeringSimilar Items
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
by: Мацевитый, В. М., et al.
Published: (2014)
by: Мацевитый, В. М., et al.
Published: (2014)
Some aspects of the heating of metal under cyclic loading
by: Мацевитый, В. М., et al.
Published: (2016)
by: Мацевитый, В. М., et al.
Published: (2016)
Some aspects of the heating of metal under cyclic loading
by: Мацевитый, В. М., et al.
Published: (2016)
by: Мацевитый, В. М., et al.
Published: (2016)
Features heating of steel shсh 15 under cyclic loading
by: Вакуленко, К. В.
Published: (2012)
by: Вакуленко, К. В.
Published: (2012)
Features heating of steel shсh 15 under cyclic loading
by: Вакуленко, К. В.
Published: (2012)
by: Вакуленко, К. В.
Published: (2012)
Complex estimation of material degradation at the cyclic loading
by: Вакуленко, К. В., et al.
Published: (2017)
by: Вакуленко, К. В., et al.
Published: (2017)
Complex estimation of material degradation at the cyclic loading
by: Вакуленко, К. В., et al.
Published: (2017)
by: Вакуленко, К. В., et al.
Published: (2017)
The system of diagnostic of a thermostressed state and operation of a resource for a rotor of a high pressure of turbine T-250/300-240 on stationary and variable operat-ing modes
by: Шульженко, Николай Григорьевич, et al.
Published: (2015)
by: Шульженко, Николай Григорьевич, et al.
Published: (2015)
The system of diagnostic of a thermostressed state and operation of a resource for a rotor of a high pressure of turbine T-250/300-240 on stationary and variable operat-ing modes
by: Шульженко, Николай Григорьевич, et al.
Published: (2015)
by: Шульженко, Николай Григорьевич, et al.
Published: (2015)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
by: Askerov, Sahib A.
Published: (2025)
by: Askerov, Sahib A.
Published: (2025)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
by: Askerov, Sahib A.
Published: (2025)
by: Askerov, Sahib A.
Published: (2025)
Re-Extension of 200 MW Turbine Cast Casing Service
by: Chernousenko, O. Yu., et al.
Published: (2019)
by: Chernousenko, O. Yu., et al.
Published: (2019)
Re-Extension of 200 MW Turbine Cast Casing Service
by: Chernousenko, O. Yu., et al.
Published: (2019)
by: Chernousenko, O. Yu., et al.
Published: (2019)
The change of the coercive force under fatigue testing of 40X steel specimens
by: Вакуленко, К. В., et al.
Published: (2015)
by: Вакуленко, К. В., et al.
Published: (2015)
The change of the coercive force under fatigue testing of 40X steel specimens
by: Вакуленко, К. В., et al.
Published: (2015)
by: Вакуленко, К. В., et al.
Published: (2015)
Assessment of Resource Parameters of the Extended Operation High-Pressure Rotor of the K-1000-60/3000 Turbine
by: Chernousenko, Olha Yu., et al.
Published: (2019)
by: Chernousenko, Olha Yu., et al.
Published: (2019)
Assessment of Resource Parameters of the Extended Operation High-Pressure Rotor of the K-1000-60/3000 Turbine
by: Chernousenko, Olha Yu., et al.
Published: (2019)
by: Chernousenko, Olha Yu., et al.
Published: (2019)
Evaluation of the efficiency of heat pumps for heating using cycle’s method
by: Kudelya, P., et al.
Published: (2016)
by: Kudelya, P., et al.
Published: (2016)
Assessment of Residual Service Life of Cast Bodies of Control Valves of 220 MW Power Units
by: Chernousenko, Olha Yu., et al.
Published: (2021)
by: Chernousenko, Olha Yu., et al.
Published: (2021)
Assessment of Residual Service Life of Cast Bodies of Control Valves of 220 MW Power Units
by: Chernousenko, Olha Yu., et al.
Published: (2021)
by: Chernousenko, Olha Yu., et al.
Published: (2021)
Analysis of the strategies for managing extended-range electric vehicle powertrain in the urban driving cycle
by: Lasocki, J., et al.
Published: (2022)
by: Lasocki, J., et al.
Published: (2022)
Microseismic monitoring technique for hydraulic fracturing of a formation for hydrocarbon deposits
by: Kobrunov, Serhii, et al.
Published: (2024)
by: Kobrunov, Serhii, et al.
Published: (2024)
Reflection of the solar activity Hale cycles on the geomagnetic field secular variations
by: Sumaruk, T.P., et al.
Published: (2020)
by: Sumaruk, T.P., et al.
Published: (2020)
FRACTURING AND PERMEABILITY OF CRYSTAL ROCKS AND THEIR FRACTURE ZONES, HYDROGEOLOGICAL ASPECT
by: ШЕСТОПАЛОВ, В.М., et al.
Published: (2022)
by: ШЕСТОПАЛОВ, В.М., et al.
Published: (2022)
Highly Efficient Cogeneration Power Plant with Deep Regeneration Based on Air Brayton Cycle
by: Rusanov, Andrii V., et al.
Published: (2019)
by: Rusanov, Andrii V., et al.
Published: (2019)
Highly Efficient Cogeneration Power Plant with Deep Regeneration Based on Air Brayton Cycle
by: Rusanov, Andrii V., et al.
Published: (2019)
by: Rusanov, Andrii V., et al.
Published: (2019)
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
by: Зульфугаров, Э. И.
Published: (2014)
by: Зульфугаров, Э. И.
Published: (2014)
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
by: Зульфугаров, Э. И.
Published: (2014)
by: Зульфугаров, Э. И.
Published: (2014)
Modeling Crack Initiation in a Composite Under Bending
by: Hasanov, Sh. G.
Published: (2018)
by: Hasanov, Sh. G.
Published: (2018)
Modeling Crack Initiation in a Composite Under Bending
by: Hasanov, Sh. G.
Published: (2018)
by: Hasanov, Sh. G.
Published: (2018)
Increasing the productivity of water in takein water-containing crystalline rocks by increasing their fracture by an explosion
by: Shestopalov, V. M., et al.
Published: (2021)
by: Shestopalov, V. M., et al.
Published: (2021)
ANALYSIS OF THE CLOSED-CYCLE PUMPED-STORAGE HYDROELECTRIC POWER STATIONS
by: Golovko , V., et al.
Published: (2024)
by: Golovko , V., et al.
Published: (2024)
About healing of defects in metals during plastic deformation (analytical review)
by: Мацевитый, Юрий Михайлович, et al.
Published: (2015)
by: Мацевитый, Юрий Михайлович, et al.
Published: (2015)
About healing of defects in metals during plastic deformation (analytical review)
by: Мацевитый, Юрий Михайлович, et al.
Published: (2015)
by: Мацевитый, Юрий Михайлович, et al.
Published: (2015)
On plotting the scheme of fracture-mega-block tectonics of the Ukrainian Shield in a scale 1 : 500 000
by: Gintov, O.B., et al.
Published: (2017)
by: Gintov, O.B., et al.
Published: (2017)
Modern seismic technologies for studying fractured carbonate reservoirs of oil and gas
by: Tyapkin, Yu.K., et al.
Published: (2020)
by: Tyapkin, Yu.K., et al.
Published: (2020)
GROUNDWATER OF FRACTURED CRISTALLINE ROCK AS RESERVE SOURCE FOR POTABLE WATER SUPPLY TO VINNITSA (UKRAINE)
by: Shestopalov, V.M., et al.
Published: (2018)
by: Shestopalov, V.M., et al.
Published: (2018)
The \(p\)–gen nature of \(M_0(V)\) (I)
by: Scott, Stuart D.
Published: (2018)
by: Scott, Stuart D.
Published: (2018)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
by: Fridman, Мark M.
Published: (2019)
by: Fridman, Мark M.
Published: (2019)
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
by: Fridman, Мark M.
Published: (2020)
by: Fridman, Мark M.
Published: (2020)
Similar Items
-
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
by: Мацевитый, В. М., et al.
Published: (2014) -
Some aspects of the heating of metal under cyclic loading
by: Мацевитый, В. М., et al.
Published: (2016) -
Some aspects of the heating of metal under cyclic loading
by: Мацевитый, В. М., et al.
Published: (2016) -
Features heating of steel shсh 15 under cyclic loading
by: Вакуленко, К. В.
Published: (2012) -
Features heating of steel shсh 15 under cyclic loading
by: Вакуленко, К. В.
Published: (2012)