Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
The model of cracking in the brake mechanism drum under action of temperature stresses at braking the automobile is work out. Thermal fracture is caused by heat generation in the drum during the friction. The model is based on the analysis of the fracturing zone. During operation of the wheel car fr...
Gespeichert in:
| Datum: | 2014 |
|---|---|
| 1. Verfasser: | Зульфугаров, Э. И. |
| Format: | Artikel |
| Sprache: | Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2014
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/27195 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Journal of Mechanical Engineering |
Institution
Journal of Mechanical EngineeringÄhnliche Einträge
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
von: Askerov, Sahib A.
Veröffentlicht: (2025)
von: Askerov, Sahib A.
Veröffentlicht: (2025)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
von: Askerov, Sahib A.
Veröffentlicht: (2025)
von: Askerov, Sahib A.
Veröffentlicht: (2025)
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: E. I. ulfugarov
Veröffentlicht: (2014)
von: E. I. ulfugarov
Veröffentlicht: (2014)
Вплив лінійного пружного середовища на граничну рівновагу пружно-пластичної циліндричної оболонки з тріщиною
von: Nykolyshyn, T. M.; Николишин Т. М.; Інститут прикладних проблем механіки і математики ім. Я. С. Підстригача НАН України, Львів
Veröffentlicht: (2018)
von: Nykolyshyn, T. M.; Николишин Т. М.; Інститут прикладних проблем механіки і математики ім. Я. С. Підстригача НАН України, Львів
Veröffentlicht: (2018)
Modeling of shear crack nucleation in a body, weakening by periodic system of circular holes
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013)
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013)
Modeling of shear crack nucleation in a body, weakening by periodic system of circular holes
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013)
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
von: S. A. Askerov
Veröffentlicht: (2020)
von: S. A. Askerov
Veröffentlicht: (2020)
THE METHODIC OF CALCULATING THE CURRENT DENSITY DISTRIBUTION IN THE DISK-SHAPED ROTOR OF ELECTRODYNAMIC BRAKE
von: Tsygankova, G.
Veröffentlicht: (2018)
von: Tsygankova, G.
Veröffentlicht: (2018)
Modeling Crack Initiation in a Composite Under Bending
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
Modeling Crack Initiation in a Composite Under Bending
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
Fracture of non-uniformly heated annular disk
von: Калантарлы, Н. М.
Veröffentlicht: (2014)
von: Калантарлы, Н. М.
Veröffentlicht: (2014)
Fracture of non-uniformly heated annular disk
von: Калантарлы, Н. М.
Veröffentlicht: (2014)
von: Калантарлы, Н. М.
Veröffentlicht: (2014)
Effect of local temperature field on retardation of curvilinear crack with allowance of plastic deformation
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
Effect of local temperature field on retardation of curvilinear crack with allowance of plastic deformation
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
Exact solution of contact problem for partial interaction of width variable slit faces at temperature field action
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2014)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2014)
Exact solution of contact problem for partial interaction of width variable slit faces at temperature field action
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2014)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2014)
Modeling of partial closure of slots system in perforated isotropic medium reinforced by stringers
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2018)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2018)
Modeling of partial closure of slots system in perforated isotropic medium reinforced by stringers
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2018)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2018)
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
von: Velizade, Evren S.
Veröffentlicht: (2020)
von: Velizade, Evren S.
Veröffentlicht: (2020)
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
von: Velizade, Evren S.
Veröffentlicht: (2020)
von: Velizade, Evren S.
Veröffentlicht: (2020)
The influence of braking on microstructure and mechanical behavior of railway wheel steels
von: O. P. Ostash, et al.
Veröffentlicht: (2012)
von: O. P. Ostash, et al.
Veröffentlicht: (2012)
Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
Development of a model of contact shoe brake-drum interaction in the context of a mine hoisting machine
von: Zabolotnyi, K., et al.
Veröffentlicht: (2017)
von: Zabolotnyi, K., et al.
Veröffentlicht: (2017)
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
Computational model of cracking in circular heated disk
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
Computational model of cracking in circular heated disk
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
Minimization of fracture parameters for friction pair hub
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015)
Minimization of fracture parameters for friction pair hub
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015)
Starting and braking of vertical conveyer
von: V. F. Monastyrskij, et al.
Veröffentlicht: (2016)
von: V. F. Monastyrskij, et al.
Veröffentlicht: (2016)
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
Update to the calculation disc clutches and brakes
von: Yu. M. Ovcharenko, et al.
Veröffentlicht: (2013)
von: Yu. M. Ovcharenko, et al.
Veröffentlicht: (2013)
Modeling of frictional heating during braking
von: O. Yevtushenko, et al.
Veröffentlicht: (2012)
von: O. Yevtushenko, et al.
Veröffentlicht: (2012)
Central election commission as a brake of decentralization
von: T. Bevz
Veröffentlicht: (2019)
von: T. Bevz
Veröffentlicht: (2019)
Influence of friction power on temperature during braking
von: K. Topchevska
Veröffentlicht: (2017)
von: K. Topchevska
Veröffentlicht: (2017)
Ähnliche Einträge
-
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: Зульфугаров, Э. И.
Veröffentlicht: (2014) -
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
von: Askerov, Sahib A.
Veröffentlicht: (2025) -
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
von: Askerov, Sahib A.
Veröffentlicht: (2025) -
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: E. I. ulfugarov
Veröffentlicht: (2014) -
Вплив лінійного пружного середовища на граничну рівновагу пружно-пластичної циліндричної оболонки з тріщиною
von: Nykolyshyn, T. M.; Николишин Т. М.; Інститут прикладних проблем механіки і математики ім. Я. С. Підстригача НАН України, Львів
Veröffentlicht: (2018)