Buchumschlag

Fetures of increase of productivity of welding an consumable electrode in gas shielded at the expense of arch activation

One of the priorities of arc welding is to improve its performance. The traditional solution to this problem involves increasing the amount of metal per unit of time weld. This is due to the limited capacity of the penetrating arc. However, this increases the attachment of heat in the weld, which ad...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	Савицкий, А. М., Савицкий, М. М., Шкрабалюк, Ю. Н.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2014
Schlagworte:	activation arc consumable electrode shielding gas welding УДК 621.789
Online Zugang:	https://journals.uran.ua/jme/article/view/27202
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Fetures of increase of productivity of welding an consumable electrode in gas shielded at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2014)

FEATURES OF ELECTRODE MELTING IN ARC WELDING OF STEELS
von: Sydorets, V. N., et al.
Veröffentlicht: (2013)

Hygienic characteristics of welding methods and welding materials
von: Levchenko, Oleg, et al.
Veröffentlicht: (2025)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2012)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2012)

On the solution of the problem of synthesis of the control system for the process of dosed feed of electrode wire for arc welding equipment
von: Lebedev, V.A.
Veröffentlicht: (2021)

Application of pulse technologies in the welding of structural steels
von: Жерносеков, Анатолий Максимович, et al.
Veröffentlicht: (2014)

Application of pulse technologies in the welding of structural steels
von: Жерносеков, Анатолий Максимович, et al.
Veröffentlicht: (2014)

Hygienic assessment of magnetic fields in different methods of arc welding
von: Levchenko, Oleg H., et al.
Veröffentlicht: (2024)

RESEARCH INTO METHODS OF PIPE END DEMAGNETIZATION UNDER MAIN PIPELINE REPAIR
von: Dobrodeyev, P. N.
Veröffentlicht: (2014)

A COMPACT 70 KV CAPACITIVE VOLTAGE DIVIDER WITH A SHIELDED TRANSFER ELECTRODE
von: Boyko, N. I., et al.
Veröffentlicht: (2012)

GEOINFORMATION ANALYSIS OF THE PROSPECTS FOR THE DEVELOPMENT OF RENEWABLE ENERGY SOURCES IN UKRAINE, TAKING INTO ACCOUNT THE REMOTENESS OF ELECTRICITY CONSUMERS
von: Zaichenko , S., et al.
Veröffentlicht: (2025)

Features of the energy distribution in ultrasonic welding for microprism optical elements
von: Tоkalin, O. A.
Veröffentlicht: (2015)

THREE-ELECTRODE AIR SWITCHBOARD WITH THE GRAPHITE ELECTRODES OF KATG-50 ON VOLTAGE TO ±50 KV AND IMPULSE CURRENT BY AMPLITUDE TO ±220 KA
von: Baranov, M. I., et al.
Veröffentlicht: (2015)

AN ANTHOLOGY OF OUTSTANDING ACHIEVEMENTS IN SCIENCE AND TECHNOLOGY. PART 17: INVENTIONS IN MATERIAL WELDING
von: Baranov, M. I.
Veröffentlicht: (2013)

Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)

Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)

APPROXIMATE CALCULATION OF ACTIVE RESISTANCE AND TEMPERATURE OF THE PULSE ELECTRIC ARC CHANNEL IN A HIGH-CURRENT DISCHARGE CIRCUIT OF A POWERFUL HIGH-VOLTAGE CAPACITOR ENERGY STORAGE
von: Baranov, M. I., et al.
Veröffentlicht: (2017)

DETERMINING THE BOUNDARIES OF THE ENERGY AUDIT SCOPE OF WORK. MATHEMATICAL MODEL
von: Rozen , V., et al.
Veröffentlicht: (2025)

Features of the ultrasonic welding of optical mikroprismatic elements wih a dosing of energy
von: Britsky, A. I., et al.
Veröffentlicht: (2016)

AN APPROXIMATE CALCULATION OF ENERGY DISSIPATION AND ELECTRIC EROSION OF ELECTRODES IN THE HIGH-VOLTAGE HIGH-CURRENT AIR SWITCH OF ATMOSPHERIC PRESSURE
von: Baranov, M. I., et al.
Veröffentlicht: (2017)

Microprocessor control system of the electroontact surfacing with two roller electrodes
von: Чепель, Юлия Анатолиевна, et al.
Veröffentlicht: (2014)

Microprocessor control system of the electroontact surfacing with two roller electrodes
von: Чепель, Юлия Анатолиевна, et al.
Veröffentlicht: (2014)

Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)

Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)

Studying the efficiency of the electrode materials operation in the electrolysis systems providing a separate cycle of gas generation
von: Соловей, Виктор Васильевич, et al.
Veröffentlicht: (2015)

Studying the efficiency of the electrode materials operation in the electrolysis systems providing a separate cycle of gas generation
von: Соловей, Виктор Васильевич, et al.
Veröffentlicht: (2015)

CONTROL OF VALVE ELECTRIC DRIVE COORDINATES OF AUTOMATED WELDING EQUIPMENT FEED MECHANISMS
von: Lebedev, V. A., et al.
Veröffentlicht: (2020)

MODELING PARAMETERS OF ARC OF ELECTRIC ARC FURNACE
von: Khrestin, R. N.
Veröffentlicht: (2015)

EXPERIMENTAL INVESTIGATION OF ELECTRICAL DISCHARGE IN LIQUID INITIATED BETWEEN CONE CHANNEL ELECTRODES
von: Ozerov, A. N., et al.
Veröffentlicht: (2013)

Development of the methodology of energy and environmental safety of Ukraine based on own geothermics
von: Starodub, Y.P., et al.
Veröffentlicht: (2023)

Increasing the channel capacity of a part of telecommunivation network at the expense of space-energy multiplexing
von: Anakhov, P. V.
Veröffentlicht: (2017)

Engineering method for determining the sulfur of mineral impurities for the prediction of hazardous properties of coal seams
von: Rudniev, Ye.S., et al.
Veröffentlicht: (2023)

A TECHNIQUE OF MEASURING OF RESISTANCE OF A GROUNDING DEVICE
von: Nizhevskyi, I. V., et al.
Veröffentlicht: (2016)

MANAGING THE LOAD SCHEDULE OF THE ADMINISTRATIVE BUILDING TAKING INTO ACCOUNT EMERGING RISKS WHEN CONNECTING THE KINETIC ENERGY STORAGE TO THE POWER SUPPLY SYSTEM
von: Shevchenko, S. Yu., et al.
Veröffentlicht: (2017)

Increasing the accuracy of solution of geometrical inverse heat conduction problems at the expense of a priori information about unknown geometric characteristics
von: Костиков, А. О.
Veröffentlicht: (2012)

Increasing the accuracy of solution of geometrical inverse heat conduction problems at the expense of a priori information about unknown geometric characteristics
von: Костиков, А. О.
Veröffentlicht: (2012)

MATHEMATICAL MODEL AND ALGORITHM FOR THE DETERMINATION OF THE ORIGIN OF ELECTRICITY FROM RENEWABLE ENERGY SOURCES IN THE ELECTRIC POWER SYSTEM
von: Hunko, I., et al.
Veröffentlicht: (2024)